Invacare Transformer All Sport, X-Terminator QR manual Adjusting Anti-tipper, Replacing Anti-tipper

SECTION 7—FOOTREST/ ANTI-TIPPER

Adjusting Anti-tipper

WARNING

When anti-tippers are used, anti-tippers MUST be adjusted to maintain a 1-1/2 to 2-inch clearance between the bottom of the anti-tipper wheels and the ground/ floor. This spacing should always be checked whenever adjustments/changes are made to the wheelchair. Failure to maintain proper spacing may result in the chair tipping over backward causing serious injury or property damage.

1.Press in the release button that secures the anti‐tipper wheels to the anti‐tipper bar.

2.Adjust the height of the anti‐tipper wheels to between 1‐1/2 and 2‐inches of the ground/floor.

3.Repeat STEPS 1‐2 for the opposite anti‐tipper.

Replacing Anti-tipper

WARNING

When anti-tippers are used, anti-tippers MUST be adjusted to maintain a 1-1/2 to 2-inch clearance between the bottom of the anti-tipper wheels and the ground/floor. This spacing should always be checked whenever adjustments/changes are made to the wheelchair. Failure to maintain proper spacing may result in the chair tipping over backward causing serious injury or property damage.

1.Press in the release button that secures the existing anti‐tipper to the anti‐tipper socket and remove the anti‐tipper from the anti‐tipper socket.

2.Insert the new anti‐tipper into the anti‐tipper socket until release button engages.

3.Press in the release button on the anti‐tipper bar and install the anti‐tipper wheels onto the new anti‐tipper bar.

4.Repeat STEPS 1‐3 for the opposite anti‐tipper.

5.Measure the distance between the bottom of the anti‐tipper wheels and the ground floor.

6.If necessary, adjust the height of the anti‐tippers. Refer to Adjusting Anti‐tipper on page 67.

PART NUMBER MEASUREMENT

1112178

21 - 1/8-inches

Part No 1114851 67 Everyday and Sport Series Wheelchairs