Invacare X-Terminator BB Adjusting Quick-Release Axles, Replacing Quad-Release Axles, NOTE End of

SECTION 5—WHEELS

Adjusting Quick-Release Axles

NOTE: For this procedure, refer to FIGURE 5.2.

1.Remove rear wheel and quick‐release axle from the wheelchair. Refer to Removing/Installing Rear Wheels on page 35.

2.Depress detent pin in the quick‐release axle and slide axle through the wheel hub.

3.Release detent pin ensuring that the locking pins are fully released.

4.Increase or decrease end play by adjusting the locknut on the end of the quick‐release axle.

5.Reinstall rear wheel onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 35.

Adjustable Axle Position

Camber Bar

Locking Pins

Locknut

Detent Pin

NOTE: End of Quick Release
axle is shown for reference	Wheel Hub
only. It is not visible when
inserted into camber bar.	Quick-Release Axle

FIGURE 5.2 Adjusting Quick-Release Axles

Replacing Quad-Release Axles

NOTE: For this procedure, refer to FIGURE 5.3.

1.Remove rear wheel and the existing quick‐release axle from the wheelchair. Refer to Removing/Installing Rear Wheels on page 35.

2.Remove existing quick‐release axle from rear wheel.

3.Insert new quad‐release axle through rear wheel hub.

4.Slide locking collar onto quad‐release axle until it is snug against rear wheel and tighten securely with allen screw.

Quick-Release	Allen Screw
Axle

5.Reinstall rear wheel and the

quad‐release axle onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 35.

6.Flip the handle of the quad‐release axle down to release the detent pin ensuring that the locking pins are fully released.

		NOTE: End of
		Quick Release
Rear Wheel	Locking	axle is shown for
		reference only. It
Hub	Collar

is not visible when inserted into camber bar.

FIGURE 5.3 Replacing Quad-Release Axles

Everyday and Sport Series Wheelchairs 36 Part No 1114851