Jackson 200LT Parts Section Motor Assembly, Wash Motor Assembly, Description, Mfg. No, Model

SECTION 6: PARTS SECTION

MOTOR ASSEMBLY

The 200 models covered in this manual come supplied with various wash motor assemblies (a wash motor assembly includes the wash motor and the pump end), depending on the characteristics of the machine. To ensure that you order the correct wash motor assembly for the model you are servicing, please refer to the following table:

Model	Volts	Hz	Phase	Wash Motor Assembly
200/200B/200LT/200S	208	60	1	06105-102-05-94
200/200B/200LT/200S	230	60	1	06105-102-05-94
200/200B/200LT/200S	208	60	3	06105-102-04-94
200/200B/200LT/200S	230	60	3	06105-102-04-94
200/200B/200LT/200S	460	60	3	06105-102-04-94

Important note: When servicing a wash motor, it is important to refer to the wiring schematic found on the motor, to ensure that the motor is wired correctly. Different manufacturers of motors may not use the same wire color codes and therefore, your new motor, which may have been built by someone different than who built your original motor, may not connect using the same wires. Always refer to the wiring diagrams on the motor you are installing. If the motor you are installing has had the schemat- ic removed, contact Jackson MSC immediately for technical support.

10

11

ITEM	DESCRIPTION	Mfg. No.
1	Motor, 208/230/460V, 1 HP, 1 Phase	06105-102-08-94
1	Motor, 208/230/460V, 1 HP, 3 Phase	06105-102-01-94
2	Adapter Plate	04730-801-00-00
3	O-Ring, Adapter Plate	05330-400-18-00
4	Mechanical Seal	05330-300-07-27
5	Impeller	04320-300-44-00
6	Pump Casing	04320-300-45-00
7	"Square Ring" Seal	05330-500-23-00
8	Flange, Suction Pipe	04320-300-43-00
9	Slinger Washer	N/A
10	Washer (3 phase only)	N/A
11	Screw, 1/4”-28 x 1/2” (3 pahse only)	N/A

200 Series Technical Manual

7610-100-45-00 Rev. E (02/10/2006)

37