Jackson CREW 44 manual Technical Manual 07610‐003‐78‐18 CURTAIN INSTALLATION INSTRUCTIONS, Length

Technical Manual (07610‐003‐78‐18)

CURTAIN INSTALLATION INSTRUCTIONS

You will ind decals on the unit marking the locations for the placement of curtains inside the machine, start‐ ing from the load end and going all the way to the unload end. The illustrations below indicates the size of the curtain to be placed on the curtain hooks provided. If you are missing any of the curtain components, it is very important you obtain replacement parts in order to make sure your unit runs correctly. Curtains are used to control the air currents inside your unit and they greatly assist in maintaining the heat necessary to keep energy costs down.

DETERMINING CONVEYOR DIRECTION: Your dish‐machine will be con igured for either Left to Right or Right to Left operation. Direction is always from the Load End to the Unload End, as shown in the examples.

`	44” Left to Right				44” Right to Left
XL S	L	L	XL	XL L	L	S	XL
Load			Unload	Unload			Load

66” Right to Left	XL L	L	S L	S XL
	Unload			Load

66” Left to Right	XL S	L S	L	L XL
	Load			Unload

IMPORTANCE OF PROPER CURTAIN PLACEMENT: The curtains inside the dish‐machine are required to be installed in a particular fashion. Note the approximate locations for each type of curtain in the above illustrations. S=Short, L=Long & XL=Extra Long. See the chart below for actual curtain lengths and part numbers. Note the XL Curtain and Curtain Rod difference for the Load End when a Side‐Loader Option is present

Legend	Length	Part Number
S	12”	08415‐131‐73‐44
L	19”	08415‐002‐14‐41
XL	24.25”	08415‐002‐47‐37
Curtain Rod	20.50”	05700‐003‐77‐52

Side‐Loader Option	Length	Part Number
XL (Load End Only)	24.25”	08415‐003‐84‐88
Curtain Rod		05700‐003‐84‐57
(Load End Only)

Page Created: 05‐04‐2010

Revised: 06‐27‐2011

22