1
NO.
1.0
DF
2.5
L R
SL
DF
C. Program number
The thread tension dials will be automatically set to “N” when selecting the program. The tensions are automatically adjusted to the proper values for the selected program.
N The instructions for machine
NOTE:
It is very important to select the correct program number corresponding to the desired stitch. Make sure to set the machine up before attempting to thread. This ensures that all machine parts are correctly positioned and makes threading easier.
D. Differential feed (DF)
Turn the DF dial to select the differential ratio shown on the display panel by setting the number to the setting mark.
Differential feed may be set from 0.5 to 2.
Example:
•SAFETY
SL
E. Stitch length (SL)
Turn the SL dial to select the stitch length shown on the display panel by setting the number to the setting mark. Stitch length may be set from 0.5 to 5.
Example:
• SAFETY
Set the SL dial to 2.5 (between 2 and 3).
22