Janome 1100D manual Flatlock, Select 3 and set up the machine, Blanket Stitch

3	1.0	2.0	N
NO.	DF	SL	L R

3

4		0.5	3.0			N
	1.0
NO.		DF	SL	L	R

4

FLATLOCK 3

Select 3 and set up the machine.

Three threads form an unbalanced stitch that can be pulled open into a flat seam. The seam resembles the top stitch seen on ready-to-wear sweatshirts and knit sportswear.

Common Uses

•Garment construction on bulky knitwear.

•Decorative accent

Thread in the following sequence:

1Red thread path for upper looper

2Green thread path for lower looper

3Yellow-1 thread path for L needle

(See pages 44-45 for detailed threading route.)

BLANKET STITCH

Select 4 and set up the machine.

An edge finish that uses decorative thread in the needle. The upper and lower looper threads pull the needle thread so it is visible on both the top and underside of the fabric.

Common Uses

•Edge finish for a single layer of fabric like a blanket or felted scarf.

•Decorative accent.

IMPORTANT:

Use medium weight decorative thread in the needle and wooly nylon threads in both loopers.

Thread in the following sequence:

1Red thread path for upper looper

2Green thread path for lower looper

3Yellow-2 thread path for L needle

(See pages 44-45 for detailed threading route.)

NOTE:

Bypass yellow tension disc. Thread should go directly from thread guide bar to thread take-up area.

34