Jenn-Air JES8860 Dual and Triple Elements, Custom Control Element, Cook and Warm Element, A B

Dual and Triple Elements

(on some models)

The Dual and Triple elements offer flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual and triple sizes combine the single, dual, and outer element and is recommended for larger cookware, larger quantities of food and home canning.

AA

BB

C

A. Single size	A. Single size
B. Dual size	B. Dual size
	C. Triple size

To Use the Dual Element:

To operate the Single element:

1.Push in and turn the control knob counterclockwise to anywhere between LOW and HIGH.

2.Turn knob to OFF when finished.

To operate the Dual or Triple elements:

1.Press the rocker switch up to use the Triple element or down to use the Dual element.

2.Push in and turn the control knob clockwise to anywhere between LOW and HIGH.

3.Turn knob to OFF when finished.

Custom Control Element

(on some models)

The Custom Control Element is a dual element that uses an electronic sensor to constantly monitor and adjust heat output for precise temperature control.

A B

A. Single element control - left side

B. Dual element control - right side

To operate the Single element:

1.Push in and turn the control knob counterclockwise from the OFF position to the Single zone anywhere between LOW and HIGH.

2.Push in and turn knob to OFF when finished.

To operate the Dual element:

1.Push in and turn the control knob clockwise from the OFF position to the Dual zone anywhere between LOW and HIGH.

2.Push in and turn knob to OFF when finished.

To Use the Triple Element:

Cook and Warm Element

WARNING

Food Poisoning HazardDo not let food sit for more than one hour before or after cooking.Doing so can result in food poisoning or sickness.

The Cook and Warm element is a fully functioning element that provides an ultra low Melt heat setting that is ideal for melting chocolate or butter.

A

B

The Melt setting is located between 3 and OFF. Heat settings

Coutside of this area function as a normal element. Use setting 3 as the Low setting.

IMPORTANT: When switching from use of the normal settings to the Melt setting, it may take a few minutes for the cooking area to cool to the Melt temperature.

A. Single element control - left side

B. Dual/Triple element control - right side C. Dual/Triple rocker switch

6