Installation instructions
1Attention: The appliance must be in- stalled according to the instructions. The installation must be undertaken by a qualified engineer according to the relevant British Standards.
Any damage resulting from improper repairs is not covered by the warranty.
1Safety information for
the installer
•The electrical installation is to be set up so that the appliance can be isolated from the mains with a minimum 3mm
Suitable separation devices include e.g. cut- outs, fuses (screw fuses are to be taken out of the holder), RCD’s and contactors.
•
•The
•
The use of thermal insulation bars is not per- mitted in cookers and ovens with Pyroluxe, if the recess has a back wall and a solid bottom to the compartment.
However if the bottom is shortened by at least 20 mm and there is ventilation in the plinth of the same diameter, it is possible to build them in.
54