Jotul GF 200 DV Table of Contents, Test Standards, Suggested Tools for Installation and Service

Jøtul GF 200 Lillehammer Direct Vent Gas Heater

Manufactured and Distributed by:

Jøtul A.S.A.

Fredrikstad, Norway

Jøtul North America

Portland, Maine

Test Standards

This appliance complies	Warnock Hersey
with National Safety	C	US
standards and is tested
and listed by Intertek

Testing Services of

Middleton, Wisconsin to ANSI Z21.88-1998 (NFPA 54) and CSA 2.33-M98 for Canada.

DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION OF THE APPLIANCE OR ITS COMPONENTS. ANY MODIFICATION OR ALTER- ATION WILL VOID THE WARRANTY, CERTIFICA- TION AND LISTING OF THIS APPLIANCE.

Suggested Tools for

Installation and Service

•External regulator (for Propane only)

•Piping which complies with local code

•Manual shutoff valve - T-Handle in MA

•Sediment trap - if required by code

•Tee joint

•Pipe wrench

•Pipe sealant

•10mm open end wrench

•1/2”, 7/16” open end wrench

•Phillips head screwdriver

•Flat head screwdriver

•1/4” nut driver

•Gloves

•Safety glasses

•Torx T20 screwdriver

•Leak test solution

•Reciprocating Saw

•Power Drill

Table of Contents
Specifications		3
General Information		5
Safety Information		6
Hearth Protection Requirements		6
Clearance Requirements		7
Mantel and Trim Clearances		7
Venting Requirements		8
Draft Restrictors		8
Vertical Vent Systems		9
Co-linear Hearthmount Systems		10
Vent Height Requirements		11
Horizontal Vent Options		12
Wall Shield Installation		13
Vent Termination Clearances		14
Mobile Home Installation		15
Fuel Conversion		16
Gas Connection		17
Gas Pressure		18
High Altitude Adjustment		19
Air Shutter Adjustment		20
Log Set Installation		20
Thermostat / Remote Control		21
Checking the System		21
Operation		22
Maintenance		23
Maintenance Record		24
Parts Illustration		25
Replacement Parts List		26
Lighting Instructions	Back Cover

THIS PRODUCT MUST BE INSTALLED BY A LICENSED MASTER PLUMBER OR GAS- FITTER WHEN INSTALLED IN THE COM- MONWEALTH OF MASSACHUSETTS.

3