Juniper Networks IDP250, IDP8200 Traffic Ports Forwarding Interfaces, Configurable NIC States

IDP 75, 250, 800, and 8200 Installation Guide

Figure 6: IDP 8200 Front Panel

Traffic Ports (Forwarding Interfaces)

The IDP 75, 250, 800, and 8200 sensors have traffic ports (forwarding interfaces), which are located on the front of each device. Sensors can have a combination of copper and fiber ports.

Figure 7: Traffic Ports

Configurable NIC States

Copper port pairs on the IDP 75, 250, 800, and 8200 can be configured to take specified actions when the sensor becomes unavailable. Using the Appliance Configuration Manager (ACM), you can configure how the sensor responds when it is shut down gracefully and how it responds when there is a failure.

10„ Traffic Ports (Forwarding Interfaces)