Juniper Networks IDP 800, IDP250, IDP8200, IDP75 manual b.Log in as root

IDP 75, 250, 800, and 8200 Installation Guide

7.Verify the SSH key fingerprint to prevent man-in-the-middle attacks:

a.Connect a PC or terminal to the IDP sensor using the console serial port.

b.Log in as root.

c.Type cd /etc/ssh and press Enter.

d.Type ssh-keygen -l -f ssh_host_dsa_key and press Enter.

You see something similar to this:

1024 f4:91:d0:04:b7:61:00:77:45:c3:cc:bd:af:b3:5b:a2 ssh_host_dsa_key.pub

8.After you have verified the key, click Next to display device information retrievable by NSM (Figure 16). This takes a moment.

Figure 16: Add Device Wizard - Retrieved Settings

9.Verify that the device type, OS version, device serial number, and device mode are correct.

10.Click Next to add the sensor to NSM as a managed device. (See Figure 17.)

Figure 17: Add Device Wizard - Adding the Device

11.Click Next to have NSM import settings already present on the sensor. (See Figure 18.)

32„ Adding Your Sensor to NSM