Juniper Networks IDP8200, IDP250, IDP 800, IDP75 manual Hardware Overview, IDP Sensors, Chapter

Chapter 2

Hardware Overview

This chapter provides detailed descriptions of the Juniper Networks IDP sensors and their components.

This chapter has the following sections:

„IDP Sensors on page 7

„Traffic Ports (Forwarding Interfaces) on page 10

„Management Ports on page 13

„Hard Drives and USB Ports on page 13

„Power Supplies on page 13

„IDP Sensor LEDs on page 14

IDP Sensors

This section provides an overview of the following IDP sensors:

„IDP 75 Sensor on page 8

„IDP 250 Sensor on page 8

„IDP 800 Sensor on page 8

„IDP 8200 Sensor on page 9

Each sensor contains a USB port you can use for reimaging the sensors.

CAUTION: Both the console serial port and the management network interface port use the same RJ-45 connector. Do not plug a network cable into the console serial port.

IDP Sensors „ 7