Setting Default Gateway, Getting Host Name | JVC VN-H37, 257VP, 237

Interpretation Acquire the current default gateway. Specify ipv4 or ipv6.

Allowed users admin, operator, user

Setting Default Gateway

Format /api/param?network.gateway(ipv4)=data

Example /api/param?network.gateway(ipv4)=192.168.0.254

Example of Response network.gateway&200 OK

Interpretation Change the default gateway. To set static default gateway, disable DHCP. Default gateway can not be changed when DHCP is enabled. Specify IP address in same segment with the camera. Specify 0.0.0.0 to delete default gateway setting. Default gateway of IPv6 can not be set.

Allowed user admin

Getting Host Name

Format /api/param?network.hostname

Example of Response network.hostname=localhost&200 OK

Interpretation Acquire the current host name.

Allowed users admin, operator, user

Setting Host Name

Format /api/param?network.hostname=data

Example /api/param?network.hostname=somename

Example of Response network.hostname&200 OK

Interpretation Change the host name. Characters that may be used for the host name are alphanumerics, hyphens (-) and period. Maximum size is 63 bytes.

Specify as %00 when the host name setting is to be left blank.

Example when leaving field blank /api/param?network.hostname=%00

Allowed user admin

Getting DNS Server On/Off Status

Format /api/param?network.dns.status

Example of Response network.dns.status=off&200 OK

Interpretation Acquire the on/off status of the DNS server. Either on or off will be returned. Allowed users admin, operator, user

Setting DNS Server Status to On/Off, or Validate Changes

Format /api/param?network.dns.status=data

71

Image 71

JVC VN-H37, 257VP, 237, 137 Setting Default Gateway, Getting Host Name, Setting Host Name, Getting DNS Server On/Off Status

Contents

VN-H37/137/237/237VP VN-H57/157WP/257/257VP Updates Page Preface JVC API for Alarm FAQ JVC Protocol Jpeg Streaming Basic ProceduresStreaming Protocol Parameter Description API Format Structure Restrictions Response FFD9 Jpeg File Format Sent Out by the camera JVC Protocol H.264 Streaming H.264 Stream Format Send Out by the camera When API is successfully received Example of H.264 Stream JVC Protocol MPEG-4 Streaming MPEG-4 Stream Format Send Out by the camera Example of MPEG-4 Stream H.264 API to Search CameraURI Jpeg Response Example System.id=VN-H37192.168.0.2/24&200 Okcrlf Using API that Requires Basic AuthenticationProcedure ParamA.ParamB.ParamC=Data&200 OK Getting ParameterApi/param?ParamA.ParamB.ParamC Api/param?ParamA.ParamB.ParamC&ParamA.ParamD.ParamE Getting Camera ID Setting ParameterJVC API for Camera As follows. /api/param?camera.id=Comment%20In%20JPEG Setting Camera IDExample of setting /api/param?camera.id=Camera01 Getting Current Scene File Number Getting Current Scene File Name Getting Preset Data of Scene FileLoading/Saving/Initializing Scene File Getting Color Level of a Scene File Setting Auto Exposure Reference of a Scene FileSetting Color Level of a Scene File Getting Auto Exposure Reference of a Scene File Getting 3DDNR of a Scene File Setting Enhance of a Scene FileSetting 3DDNR of a Scene File Getting Enhance of a Scene File Getting B-Gain of White Balance of a Scene File Setting White Balance of a Scene FileSetting R-Gain of White Balance of a Scene File Getting R-Gain of White Balance of a Scene File Getting AGC of a Scene File Setting B-Gain of White Balance of a Scene FileSetting AGC of a Scene File Setting Limit of Sense Up of a Scene File Getting Shutter Speed of a Scene File Setting ALC priority of Scene FileSetting Shutter Speed of a Scene File Getting ALC priority of Scene FilePage Getting Clvi of a Scene File Setting Back Light Compensation of a Scene FileSetting Clvi of a Scene File Getting Back Light Compensation of a Scene File Getting Compression Format Setting Compression FormatGetting Resolution Frame Size JVC API for Encode Setting Rate Control Setting Resolution Frame SizeGetting Rate Control Setting Getting H.264 or MPEG-4 I-Frame Interval Setting Setting H.264 or MPEG-4 bitrateGetting Jpeg File Size Setting Setting Jpeg File Size Setting Monitor Out Status Setting H.264 or MPEG-4 I-Frame IntervalGetting Frame Rate Setting Setting Frame Rate JVC API for Audio VN-H57/157WP/257/257VP Getting Audio Duplex ModeSetting Audio Duplex Mode Setting Mike Gain Getting On/Off of Alarm Action JVC API for AlarmGetting Mike Power Supply setting Setting Mike Power Supply Example of Response application.event1.action=&200 OK Getting Alarm ActionFormat /api/param?application.eventNumber.action Api/param?application.event1.action Example of Response Returned. Segments are indicated by Format /api/param?application.eventNumber.action=Data Setting Alarm ActionSetting Example To add JPEG, specify objectNumber instead of none Setting Alarm Filter Getting Alarm Filter Setting Setting Alarm Filter Time Getting Alarm Filter Time Setting Alarm Filter Type Getting Alarm Filter Type Format /api/param?application.eventNumber.trigger=data Getting Alarm TriggerSetting Alarm Trigger Format /api/param?application.eventNumber.trigger Setting Example /api/param?application.event6.trigger=i1500 JVC API for Alarm EnvironmentSetting Example /api/param?application.event1.trigger=v1 Setting Smtp Server Port Number Getting Smtp Server Address SettingSetting Smtp Server Address Getting Smtp Server Port Number Setting Getting POP Server Address Setting Setting Sender Mail AddressGetting POP before Smtp Setting Setting POP before Smtp Getting POP Server User Name Setting Setting POP Server AddressGetting POP Server Port Number Setting Setting POP Server Port Number Example of Response application.pop.user&200 OK Setting POP Server PasswordGetting FTP Server Address Setting Setting FTP Server Address Setting FTP Server User Name Getting FTP Server Path SettingSetting FTP Server Path Getting FTP Server User Name Setting Getting File Naming of Periodic FTP Setting FTP Server PasswordSetting File Naming of Periodic FTP Api/param?application.ftp.password=%00 Getting Parameters of Pre/Post Recording for FTP Setting User Define Name of File NamingGetting User Define Name of File Naming Getting SD Card Status Setting Parameters of Pre/Post Recording for FTPJVC API for SD Card Record Formatting SD Card Setting SD Card to Use/DisableSetting SD Card Constant Recording On/Off Getting Status of SD Card formatting Getting Encoder No. for SD Card Recording Setting Encoder No. for SD Card RecordingGetting SD Card Capacity Getting SD Card Recording Status JVC API for Digital PTZ Getting Auto Return ModeSetting Auto Return Mode Getting Speed of Going to Preset Position Getting Timeout of Auto ReturnSetting Timeout of Auto Return Setting Auto Return Status Moving to Specified Pan Position Setting Speed of Going to Preset PositionSetting Direction of Pan Operation Getting Pan Position Moving to Specified Tilt Position Setting Speed of Pan OperationGetting Pan Operation Status Getting Tilt Position Getting Zoom Position Setting Direction of Tilt OperationSetting Speed of Tilt Operation Getting Tilt Operation Status Getting Zoom Operation Status Setting Direction of Zoom OperationSetting Speed of Zoom Operation Zoom Operation Initialize Preset Position Getting Current Preset PositionGetting Status of Specified Preset Position Register Current Position as Preset Position JVC API for Auto Patrol Getting Duration of Auto Patrol Getting Preset Postion Number of Auto PatrolSetting Preset Postion Number of Auto Patrol Setting Duarion of Auto Patrol Getting Speed of Auto Patrol Setting Speed of Auto PatrolSaving Preset Position Number/Duarion of Auto Patrol JVC API for Privacy Masking Getting Privacy Masking Area Setting Privacy Masking to On/OffSetting Privacy Masking Color Getting Privacy Masking Color Getting Motion Detect Sensitivity Setting Motion Detect to On/OffSetting Motion Detect Sensitivity Getting Motion Detect Mask Setting Motion Detect MaskJVC API for Tampering Detect Getting Tampering Detect Sensitivity Setting Tampering Detect to On/OffSetting Tampering Detect Sensitivity Getting Tampering Detect On/Off Status Allowed user admin Enabling Network Setting ChangesGetting Dhcp Setting Setting Dhcp Getting IP Address Setting IP AddressSetting Subnet Mask Getting Default Gateway Getting Host Name Setting Default GatewaySetting Host Name Setting DNS Server Status to On/Off, or Validate Changes Getting IPv6 status Setting DNS Server IP AddressSetting IPv6 status Getting DNS Server IP Address Getting TOS Value of Stream Setting TOS Value of StreamGetting Global Address of IPv6 Getting MAC Address Getting Multicast TTL Value Setting Unicast TTLSetting Multicast TTL Getting Unicast TTL Value JVC API for Protocol Setting MTU ValueGetting Network Negotiation Setting Setting Network Negotiation Getting Status of AMX Discovery Protocol Setting Port Number of HttpSetting Status of AMX Discovery Protocol Setting Status of Psia Protocol Getting Status of Onvif Protocol Setting Status of Onvif ProtocolSetting Status of Multicast Streaming, or Save Changes JVC API for Multicast Streaming Getting Multicast Port Number Setting Multicast AddressSetting Multicast Port Number Getting Multicast Address Getting Audio Multicast Address Setting Frame Rate of Jpeg MulticastGetting Status of Audio Multicast Streaming Getting Deny/Allow Setting of Client Restrictions JVC API for Access RestrictionsSetting Audio Multicast Address Setting Audio Multicast Port Number Format /api/param?network.accesscontrolstreamout.hostNumber Setting Client Restriction to Deny/AllowGetting IP Address Setting of Restricted Client Setting IP Address of Restricted Client Getting On/Off of Sntp Client Setting On/Off of Sntp Client, or Validate ChangesSetting NTP Server Address JVC API for Time Setting Access Interval Unit of Sntp Getting Access Interval to NTP ServerSetting Access Interval to NTP Server Getting Access Interval Unit of NTP Getting Timezone Setting Time Format /api/param?system.password.adminnum=data2 JVC API for PasswordSetting Timezone Setting Password of admin Delete Acount JVC API for MaintenanceSetting Password of operator Setting Password of user JVC API for LED Setting Getting Sending Status Getting LED blinking modeSetting LED blinking mode JVC API for Getting Status Format /api/param?system.log Alarm input 1ch makeGetting Log Getting Model Name Getting Firmware Revisions Getting Alarm Input Status VN-H57/157/257Getting Mode of FTP Server JVC API for Others Getting Control Port Number of FTP Server Setting Mode of FTP ServerSetting Control Port Number of FTP Server Setting Port Number of Rtsp Server Example /api/param?network.rtsp.port=554 Camera Sending Audio to the Camera VN-H57/157WP/257/257VP Response When API is successfully received Camera Procedures Playback control Getting SD Card data from the Camera via RTSP/RTP Example of message sequence 1fCRLF Exporting H.264 data from SD Card to the PCGetting Total Number of Files and File Size Exporting SD Card Data as a File Protocol / Port Number Use List of Protocols and Port Numbers UsedCustomizing Built-in Viewer List of ActiveX Properties of ActiveX How to download ActiveX controls 102 Direction Number of n How to use ActiveX Control by HtmlMethod of ActiveX Control Sample code Html Sample 105 106 107 Psia FAQ