/api/param?application.pop.user=%00
The user name is used as local part of sender mail address when sender mail address setting is blank. When the user name is blank, the
Example of setting /api/param?application.pop.user=somename
Example of Mail Address somename@somecompany.com
Following characters must not be used in user name.
space ( ) < > [ ] : ; ¥ ,(comma)
Allowed users admin, operator
Setting POP Server Password for VN-V685/686/686B
Format /api/param?application.pop.password=data
Example /api/param?application.pop.password=someword
Example of Response application.pop.password&200 OK
Interpretation Change the password setting of the POP server. The maximum password size is 32 bytes. Set as follows when this is to be left blank. /api/param?application.pop.password=%00
Allowed users admin, operator
(Note: There is no API for reading passwords.)
Getting FTP Server Address Setting from VN-V685/686/686B
Format /api/param?application.ftp.host
Example of Response application.ftp.host=192.168.0.200&200 OK
Response example when setting field is left blank application.ftp.host=&200 OK
Interpretation Acquire the FTP server address setting used for FTP transmission via alarm. Allowed users admin, operator, user
Setting FTP Server Address for VN-V685/686/686B
Format /api/param?application.ftp.host=data
Example /api/param?application.ftp.host=10.0.0.200
Example of Response application.ftp.host&200 OK
Interpretation Change the FTP server address setting used for FTP transmission via alarm. Specify the IP address or FQDN. The maximum FQDN size is 63 bytes. Specify as 0.0.0.0 when the FTP server is not set. It is also possible to leave the setting field blank as follows. /api/param?application.ftp.path=%00
Allowed users admin, operator
Getting FTP Server Path Setting from VN-V685/686/686B
49