JVC AV28X25EU, AV32X25EU, AV28H20EU, AV32H20EU manual „ ID List, „ Dubbing

Using the TV’s menu

To cancel the S-IN (S-VIDEO input) setting:

Press the yellow button and turn off S-IN (S-VIDEO input) mark. The regular video signal (composite signal) pictures are resumed.

• The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set S-IN (S-VIDEO input) in the EXT-1 terminal.

• Setting S-IN (S-VIDEO input) changes the head character from “E” to “S”. For example, “E2” is changed to “S2”.

• Even a device which enables the S-

VIDEO signal (Y/C signal) to be output may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because S-IN (S- VIDEO input) setting has been made, read the device Instruction Manual carefully again to check for the device settings.

„ ID LIST

You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name.

1 Choose an EXT terminal			IDLIST
nameEXTSETTING1list (ID LIST)
2 Press the blue button to display the
	3	DUBBING	VHS
EXT-4		EXT-2	GASTBME
			-VHS
TV			DVC
			LD
D0021TV-EN BACKOK			DVD
			8mmHi-

3Press the 6buttons to choose a name. Then press the abutton

The ID LIST disappears and the name is assigned to the EXT terminal.

•You cannot assign an EXT terminal name not found in the name list (ID LIST).

To erase a name assigned to the EXT terminal:

Choose a blank space.

4 Press the abutton to complete the setting

„ DUBBING

You can choose a signal source to be output from an EXT-2 terminal.

You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.

	EXTSETTING1
1 Press the 5buttons to choose
		EXT-4	EXT-2
the arrow from the menu
		3	DUBBING
TV		TVBACK
		OK
D0022-EN

2Press the 6buttons to choose an EXT terminal or TV.

Then press the abutton

The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

ENGLISH

23