Additional menu operations
35
ENGLISH
AV32/28X25EU / AV32/28H20EU / AV28CH1EU / LCT1142-001A-U / English
3 Press the 5
55
5 and the 6
66
6 buttons
to choose a country
4 Press the a
aa
a button to complete
the setting
The menu disappears.
To return to the INSTALL menu from
the COUNTRY menu:
Press the h (Information) button instead of
the a button.
Using the DECODER (EXT-2) function
When connecting a Decoder with a T-V
LINK compatible VCR connected to the
EXT-2 terminal, use the DECODER (EXT-
2) function to unscramble the scrambled TV
channels.
1 Turn on the Decoder power
2 Display the TV channel capable of
being unscrambled with the
Decoder on the TV
Even if the Decoder is functioning, a
scrambled picture appears at this time.
3 Press the a
aa
a button to display the
MENU
The MENU (main menu) appears.
4 Press the 6
66
6 buttons to choose
FEATURES. Then press the a
aa
a
button
The FEATURES menu appears.
5 Press the 6
66
6 buttons to choose
DECODER (EXT-2). Then press the
5
55
5 buttons to choose ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
6 Press the a
aa
a button to complete
the setting
The T-V LINK menu appears.
7 Follow the operating procedure
“Downloading the data to VCR” on
page 34 to transmit the Programme
number (PR) data to the VCR
8 If you have another TV channel
capable of being unscrambled with
a Decoder, repeat steps 2 through 7
If for some reason the DECODER (EXT-
2) function has been set to “ON” but the
TV channel cannot be unscrambled, check
the following:
• Has the Decoder been connected to the
VCR properly according to the VCR
and Decoder Instruction Manuals?
• Has the Decoder power been turned
on?
• Can the TV channel be unscrambled
with a Decoder?
• Is it necessary to change the VCR
settings in order to connect the
Decoder? Confirm that the VCR is set
properly by rechecking the VCR
Instruction Manual.
AV32&28H20EU_Eng.fm Page 35 Wednesday, February 20, 2002 2:04 PM