Using the TV’s menu
27
ENGLISH
AV32/28X25EU / AV32/28H20EU / AV28CH1EU / LCT1142-001A-U / English
INSTALL

LANGUAGE

You can choose the language you want to use
for the on-screen display from the language
list in a menu.
1 Choose LANGUAGE, then press
the a
aa
a button
A sub-menu of the LANGUAGE function
appears.
2 Press the 5
55
5 and 6
66
6 buttons to
choose a language.
Then press the a
aa
a button

AUTO PROGRAM

You can automatically register the TV
channels which can be received well at your
residence in the TV’s Programme numbers
(PR) by performing the following.
1 Choose AUTO PROGRAM. Then
press the a
aa
a button
The COUNTRY menu appears as a sub-
menu of the AUTO PROGRAM function.
There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY menu as follows:
2 Press the 5
55
5 and 6
66
6 buttons to
choose the country where you are
now located
3 Press the blue button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically registered in the
Programme numbers (PR).
• To cancel the AUTO PROGRAM
function, press the b button.
After the TV channels have been
registered in the Programme
numbers (PR), the EDIT menu
appears.
• You can proceed to edit the
Programme numbers (PR) using the
EDIT/MANUAL function. For details,
see “EDIT/MANUAL” on page28.
• If you do not need to use the EDIT/
MANUAL function, go to the next
step.
If “ACI START/ACI SKIP” appears
in the AUTO PROGRAM menu:
You can use the ACI (Automatic Channel
Installation) function to decode the ACI
data and complete the registration of all
the TV channels in a short period of time.
For details of the ACI function and how to
use it, refer to “Using the ACI function”
on page33.
If you don’t want to use the ACI function,
press the 6 buttons to choose ACI
SKIP and then press a.
AV32&28H20EU_Eng.fm Page 27 Wednesday, February 20, 2002 2:04 PM