JVC GC X 1 manual 42 EN, Shooting Continuous Photos

2

Turn the Power dial to “M”.

•Hold the Lock button down while turning the Power dial.

Select “MANUAL” with the MODE switch. •“MANUAL” appears on the LCD panel.

7,8

42EN

MANUALSHOOTING(cont.)

Shooting Continuous Photos

With this mode you can shoot 2 continuous photos.

3,6 4,5

1

SET	4	OFF
		M
		V

CAMERA SETTING

W. BALANCE	AUTO
SENS.	80
TELEPHOTO	1X
M. DRIVE	ON
AE/AF	MULTI
CLEAR	EXE

1

2

3 Press the DSP button until the CAMERA SETTING screen appears.

4 Press the r t button to select “M. DRIVE”.

5 Press the w e button to select “ON”.

6 Press the DSP button to turn off the menu screen.

7 Point the lens at the subject and half-press the Shutter button.

•The camera will continue to focus on the subject while the button is half-pressed. The shoot standby lamp (green) flashes.

•To display the image on the LCD screen while shooting, press the DSP button.

8 Press the Shutter button all the way for over 1 second to take the picture.

•If the flash is set, it will only flash for the first photo.

NOTES:

●It is not possible to shoot continuous photos if the uncompressed picture quality is selected.

●The picture appears dark when shooting at dark location inside a room, etc.