EN 41
CAMERA SETTING
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AE/AF
CLEAR
AUTO
80
2X
OFF
MULTI
EXE
4,5 1
OFF
M
4
SET
V
7,8
3,6

Changing the Zoom Power While Shooting

Depending on the image size, it is possible to enlarge a subject without sacrificing the current image quality.
Because the zoom power cannot be changed in some instances if the image is large, reduce the image size
(Z pg. 28) before changing the zoom power.
1
Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2
Select “MANUAL” with the MODE switch.
•“MANUAL” appears on the LCD panel.
3
Press the DSP button until the CAMERA
SETTING screen appears.
4
Press the r t button to select
“TELEPHOTO”
.
5
Press the w e button to select “2X” or “3.2X”.
•The zoom powers that can be selected
depend on the image size.
2032 x 1536: 1X
1024 x 768: 1X/2X
640 x 480: 1X/2X/3.2X
6
Press the DSP button to turn off the menu
screen.
7
Point the lens at the subject and half-press the
Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
8
Press the Shutter button all the way to take
the picture.
2