JVC GC X 1 manual Exposure Control, 2EV

•Hold the Lock button down while turning the Power dial.

EN37

Exposure Control

If the subject is predominantly white, black, red, etc., the resulting picture may be underexposed (too dark). In such a case, it is necessary to use the exposure control to restore the picture to a more realistic image. With this camera, you can make this adjustment by up to +/–2 iris steps in units of 0.5EV (exposure value).

23,4

1

SET 4

OFF M

V

(–2EV)

1 Turn the Power dial to “M”or “V”.

2 Press the Exposure control button (+/–), and then press the w e button within 3 seconds.

•Press the e button to cycle through the following modes:

–2 → –1.5 → –1.0 → –0.5 → 0 → +0.5 → +1.0 → +1.5 → +2.0

(Darker to brighter)

•Press the w button to cycle through the modes in the opposite direction.

(+2EV)

3 Point the lens at the subject and half-press the Shutter button.

•The camera will continue to focus on the subject while the button is half-pressed. The shoot standby lamp (green) flashes. •To display the image on the LCD screen while shooting, press the DSP button.

4 Press the Shutter button all the way to take the picture.