Have intended them to play Recorded | JVC GET0576-001A specification

MP3/WMA playback

USB device playback

Symptoms	Remedies/Causes
• A longer readout time is required	Do not use too many hierarchical levels and folders.
(“READING” keeps flashing on the display).

• Tracks do not play back in the order you	The playback order is determined when the files are
have intended them to play.	recorded.

• The elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by
	how the tracks are recorded on the disc.

• “NO FILE” appears on the display.	Selected folder is an empty folder*. Select another folder
	that contains MP3/WMA tracks.
	* Folder that is physically empty or folder that contains
	data but does not contain valid MP3/WMA track.
• The correct characters are not displayed	This unit can only display letters (upper case), numbers,
(e.g. album name).	and a limited number of symbols.
• Noise is generated.	The track played back is not an MP3/WMA track. Skip to
	another file. (Do not add the extension code <.mp3> or
	<.wma> to non-MP3 or WMA tracks.)

• “READING” keeps flashing on the display.	• Readout time varies depending on the USB device.
	• Do not use too many hierarchy or folders.
	• Turn off the power then on again.
	• Reattach the USB device again.

• “NO FILE” appears on the display.	Selected folder is an empty folder*. Select another folder
	that contains MP3/WMA tracks.
	* Folder that is physically empty or folder that contains
	data but does not contain valid MP3/WMA track.

• Tracks/folders are not played back in the	The playback order is determined by the write-in time
order you have intended.	stamp. The first track/folder written into the USB device
	will be the first track/folder for playback.

• “CANNOT PLAY” flashes on the display.	• Attach a USB device that contains tracks encoded in an
• “NO USB” appears on the display.	appropriate format.
• The unit cannot detect the USB device.	• Reattach the USB device again.

• Correct characters are not displayed (e.g.	This unit can only display alphabets (upper case),
album name).	numbers, and a limited number of symbols.
• While playing a track, sound is sometimes	The MP3/WMA tracks have not been properly copied into
interrupted.	the USB device.
	Copy MP3/WMA tracks again into the USB device, and
	try again.

•Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

20

Image 112

JVC GET0576-001A manual Have intended them to play Recorded

Contents

For customer Use For canceling the display demonstration, seeModel No Serial No GET0576-001A Temperature inside the car For safetyInformation For U.S.A Contents Basic operations Display window Using the remote controller RM-RK50 Before using the remote controller Turn on the power Cancel the display demonstrationsPreparation Set the clock You can preset up to 18 stations for FM Listening to the radioSelect FM or AM Station Sequential Memory Prohibiting disc ejection Disc operationsSelecting a track/folder Listening to the USB device Selecting the playback modesRepeat Ô Random ALL RND Listening to the other external components Straightly pull it out from the unitDo not start the car engine if a USB device is connected For more details about USB operations, see pages 19 Selecting a preset sound mode Preset value setting for each sound mode Title assignment To erase the entire title Menu operations Area Area US Area EUArea SA If Band Auto Mode SUB.W RearLOW MID Color settings Adjust the level 00 to 31 of the selected primary colorCreating your own color -USER Color Select Color = User More about this unit Playing an MP3/WMA disc Bit rate of MP3 32 kbps 320 kbps Sampling frequency of MP3Romeo up to 64 characters Joliet up to 32 characters Search function works but search speed is not constant Ejecting a disc or removing a USB device This unit does not support SD card reader Troubleshooting Symptoms Remedies/Causes USB device playback Symptoms Remedies/Causes Playback How to clean the connectors MaintenanceDo not use the following discs Audio Amplifier Section Specifications≤ 1% THD+N USB Section CD Player SectionGeneral Call KD-R400 Installation Precautions on power supply and speaker connections Precautions sur l’alimentation et la connexion des enceintes Troubleshooting KD-R501/KD-R402/KD-R401 Battery Products European Union only Components Using the remote controller-RM-RK50 Enter PTY Searching mode Hold Confirm the selection Press FM Enter SSM preset mode HoldFM = CD * 2 = USB = AUX in * 3 = AM * 3 = MO monaural Disc Folder, RPT repeat EQ equalizer indicator Procedure. To return to the previous menu, press Back Station Frequency = Clock = back to the beginningFM Radio Beginning Automatic presetting FM-SSM Strong Manual presetting FM/AM Ex. Storing FM station of 92.50 MHz into preset numberTA Standby Reception Appears To activate TA Standby Reception PTY codesPTY Standby Reception Turn on the power Insert a disc MP3/WMA Select folder PressSelect trackPressPause/resume playback Hold Reverse/fast-forward track To stop play and detach the USB device Press SRC to listen to another playback source Adjust the sound as you want see pages 14 Adjust the volumeSelect AUX Installing the lithium coin battery CR2025 Using the remote controller RM-RK50Turns the power on if pressed briefly or See page 15 for User settings Storing your own sound mode Select User for EQ Select the desired item Repeat if necessary24H/12H Hour AF on VolumeMono on FADER*7,*8 R06 F06 BALANCE*8Loud Loud OFF Muting Color settings for KD-R501 AM*11AUX IN*12 Select a primary color FM Radio Data System operations Use only finalized CD-Rs or CD-RWs Pickup lens inside the unit is dirty This unit cannot play back the following files On the display Connect the aerial firmlyCompliant with ISO 9660 Level 1, Level 2, Romeo, or Numbers, and a limited number of symbols Album name New discs may have some rough spots Make sure to store discs in cases after use Maximum Power Output Per channelDistortion 70 dB Power Requirement Operating Voltage 0C to +40C Соответствующую страницу Ανατρέξτε στην ενότητα Επαναφορά της µονάδας Precautions on power supply and speaker connections Anschließen der StromversorgungΚατάλoγoς εξαρτηµάτων για την εγκατάσταση και τις συνδέσεις Πρoφυλαξεισ κατά τις συνδέσεις Einbau Электрические Подключения Ηλεκτρικεσ ΣΥΝ∆ΕΣΕΙΣ Bыявление Неисправностей Λευκή ρίγα µε τo καλώδιo τηλεχειρισµoύ της For canceling the display demonstration, see KD-R407 Available characters on the display Available characters Display indications Selecting a preset sound mode Menu operations Turn off the power Hold Select the source AUX auxiliary input jack Operations Select Clock =CLOCK SET Station Frequency =Clock =back to the beginningTo the beginning Turn =Press Select FM, AM, or FM-LO Search for a station to listen-Auto SearchFM-LO 65.00 MHz 74.00 MHz SSM FM-LO, and 6 stations for AM Number Tracing the same programme- Network-Tracking Reception Selecting the playback modes RPT OFF or RND OFF To cancel repeat play or random play, selectRandomly plays all tracks Adjust the sound as you want see pages 13 See page 14 for User settings Freq Adjustment made will be stored automatically Scroll DemoInitial AF-REG *4 AF on Search *4MONO*6 Mono on FADER*7, *8 R06 F06 AMP GAIN*10 TEL MutingAUX IN*12 AUX OFF More about this unit Windows extension up to 32 characters Menu operations Discs Number of symbols see To remove these rough spots, rub the edges with a Maximum Power Output Front/Rear Per channel MHz to 74.00 MHZKHz to 1 620 kHz KHz to 279 kHz English References Затруднения при эксплуатации? Для получения информации о перезагрузке Вашего устройства Застереження щодо приєднання джерела Precautions on power supply and speakerПерелік деталей для встановлення та з’єднання Встановлення Електричні З’ЄДНАННЯ Несправності KD-R504 Do not raise the volume level too much, as this will Contents Enter list operations Enter Menu setting Hold Select the sound modeSelect the source Remote sensor FM = AM*2 = CD*3 = USB = AUX IN*2 = Operations Time Preparation Select FM or AM Search for a station to listen-Auto Search Selecting preset station For AM PressPause/resume playback Adjust the volume Adjust the sound as you want see pages 12 Selecting a preset sound mode Title assignment Monaural mode MONO*3 Mono on FADER*4,*5 R06 F06 BALANCE*5Initial VOL ADJ Source AUX AM station Ink jet printer MP3 files encoded in an inappropriate format Title assignment Discs in general MP3/WMA playback Symptoms Remedies/Causes General Have intended them to play Recorded New discs may have some rough spots AM Tuner Sensitivity 20 μV Selectivity 35 dB CD Player Section Having Trouble with operation? When installing the unit without using the sleeve KD-R504 Electrical Connections KD-R506/KD-R505/ KD-RC502/KD-RC501 Do not raise the volume level too much, as this will Contents Basic operations Operations Using the remote controller RM-RK50 Preparation Listening to the radio Disc operations Listening to the USB device For more details about USB operations, see Level Title assignment Menu operations If Band Auto AUX IN*9 WMA files which are not based upon Windows Media Audio Title assignment Troubleshooting Numbers, and a limited number of symbols Maintenance Specifications English References EN, TH KD-R506/KD-R505/KD-RC502/KD-RC501 √µ‘¥µ-Èß√ª√-Õ·ºßÀπÈªí∑¡Ï‡¢È √‡ËÕ¡‚¥¬„È‰øøÈ √µ√« Õªí≠À¢-¥¢ÈÕß