Manuals / JVC / Car Audio and Video / Car Stereo System

JVC GET0576-001A manual Playback, Numbers, and a limited number of symbols

Models: GET0576-001A

1 146

Download 146 pages 27.8 Kb

Page 138

ENGLISH	playback
	MP3/WMA

USB device playback

Symptoms	Remedies/Causes
• A longer readout time is required	Do not use too many hierarchical levels and folders.
(“READING” keeps flashing on the display).

• Tracks do not play back in the order you	The playback order is determined when the files are
have intended them to play.	recorded.

• The elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by
	how the tracks are recorded on the disc.

• “NO FILE” appears on the display.	Selected folder is an empty folder*. Select another folder
	that contains MP3/WMA tracks.
	* Folder that is physically empty or folder that contains
	data but does not contain valid MP3/WMA track.

• The correct characters are not displayed	This unit can only display letters (upper case), numbers,
(e.g. album name).	and a limited number of symbols.
• Noise is generated.	The track played back is not an MP3/WMA track. Skip to
	another file. (Do not add the extension code <.mp3> or
	<.wma> to non-MP3 or WMA tracks.)

• “READING” keeps flashing on the display.	• Readout time varies depending on the USB device.
	• Do not use too many hierarchy or folders.
	• Turn off the power then on again.
	• Reattach the USB device again.

• “NO FILE” appears on the display.	Selected folder is an empty folder*. Select another folder
	that contains MP3/WMA tracks.
	* Folder that is physically empty or folder that contains
	data but does not contain valid MP3/WMA track.

• Tracks/folders are not played back in the	The playback order is determined by the write-in time
order you have intended.	stamp. The first track/folder written into the USB device
	will be the first track/folder for playback.

• “CANNOT PLAY” flashes on the display.	• Attach a USB device that contains tracks encoded in an
• “NO USB” appears on the display.	appropriate format.
• The unit cannot detect the USB device.	• Reattach the USB device again.

• Correct characters are not displayed (e.g.	This unit can only display alphabets (upper case),
album name).	numbers, and a limited number of symbols.

• While playing a track, sound is sometimes	The MP3/WMA tracks have not been properly copied into
interrupted.	the USB device.
	Copy MP3/WMA tracks again into the USB device, and
	try again.

•Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

20

Image 138

JVC GET0576-001A manual Playback, Numbers, and a limited number of symbols

Contents

For canceling the display demonstration, see For customer UseModel No Serial No GET0576-001A For safety Temperature inside the carInformation For U.S.A Contents Basic operations Display window Using the remote controller RM-RK50 Before using the remote controllerPreparation Turn on the powerCancel the display demonstrations Set the clockSelect FM or AM You can preset up to 18 stations for FMListening to the radio Station Sequential MemoryDisc operations Prohibiting disc ejectionSelecting a track/folder Repeat Ô Random Listening to the USB deviceSelecting the playback modes ALL RNDDo not start the car engine if a USB device is connected Listening to the other external componentsStraightly pull it out from the unit For more details about USB operations, see pages 19Selecting a preset sound mode Preset value setting for each sound modeTitle assignment To erase the entire titleMenu operations Area SA Area Area USArea EU If Band AutoLOW Mode SUB.WRear MIDCreating your own color -USER Color Color settingsAdjust the level 00 to 31 of the selected primary color Select Color = UserMore about this unit Romeo up to 64 characters Joliet up to 32 characters Playing an MP3/WMA discBit rate of MP3 32 kbps 320 kbps Sampling frequency of MP3 Search function works but search speed is not constantEjecting a disc or removing a USB device This unit does not support SD card readerTroubleshooting Symptoms Remedies/CausesUSB device playback Symptoms Remedies/Causes PlaybackMaintenance How to clean the connectorsDo not use the following discs Specifications Audio Amplifier Section≤ 1% THD+N CD Player Section USB SectionGeneral Call KD-R400 Installation Precautions on power supply and speaker connections Precautions sur l’alimentation et la connexion des enceintesTroubleshooting KD-R501/KD-R402/KD-R401 Battery Products European Union onlyComponents Using the remote controller-RM-RK50 Confirm the selection Press FM Enter SSM preset mode Hold Enter PTY Searching mode HoldFM = CD * 2 = USB = AUX in * 3 = AM * 3 = MO monaural Disc Folder, RPT repeat EQ equalizer indicator FM Radio Procedure. To return to the previous menu, press BackStation Frequency = Clock = back to the beginning BeginningAutomatic presetting FM-SSM Strong TA Standby Reception Manual presetting FM/AMEx. Storing FM station of 92.50 MHz into preset number AppearsPTY codes To activate TA Standby ReceptionPTY Standby Reception PressPause/resume playback Turn on the power Insert a discMP3/WMA Select folder PressSelect track Hold Reverse/fast-forward trackTo stop play and detach the USB device Press SRC to listen to another playback sourceAdjust the volume Adjust the sound as you want see pages 14Select AUX Using the remote controller RM-RK50 Installing the lithium coin battery CR2025Turns the power on if pressed briefly or See page 15 for User settings Storing your own sound mode Select User for EQ24H/12H Select the desired itemRepeat if necessary HourVolume AF onMono on Loud Loud OFF FADER*7,*8 R06 F06BALANCE*8 MutingAUX IN*12 Color settings for KD-R501AM*11 Select a primary colorFM Radio Data System operations Use only finalized CD-Rs or CD-RWs Pickup lens inside the unit is dirtyThis unit cannot play back the following files Connect the aerial firmly On the displayCompliant with ISO 9660 Level 1, Level 2, Romeo, or Numbers, and a limited number of symbols Album nameNew discs may have some rough spots Make sure to store discs in cases after useDistortion Maximum Power OutputPer channel 70 dBPower Requirement Operating Voltage 0C to +40CСоответствующую страницу Ανατρέξτε στην ενότητα Επαναφορά της µονάδαςΚατάλoγoς εξαρτηµάτων για την εγκατάσταση και τις συνδέσεις Precautions on power supply and speaker connectionsAnschließen der Stromversorgung Πρoφυλαξεισ κατά τις συνδέσειςEinbau Электрические Подключения Ηλεκτρικεσ ΣΥΝ∆ΕΣΕΙΣ Bыявление Неисправностей Λευκή ρίγα µε τo καλώδιo τηλεχειρισµoύ τηςFor canceling the display demonstration, see KD-R407Available characters on the display Available characters Display indicationsSelecting a preset sound mode Menu operations Turn off the power Hold Select the source AUX auxiliary input jackOperations To the beginning Select Clock =CLOCK SETStation Frequency =Clock =back to the beginning Turn =PressFM-LO 65.00 MHz 74.00 MHz Select FM, AM, or FM-LOSearch for a station to listen-Auto Search SSMFM-LO, and 6 stations for AM NumberTracing the same programme- Network-Tracking Reception Selecting the playback modes To cancel repeat play or random play, select RPT OFF or RND OFFRandomly plays all tracks Adjust the sound as you want see pages 13 See page 14 for User settings FreqAdjustment made will be stored automatically Demo ScrollInitial MONO*6 Mono on AF-REG *4 AF onSearch *4 FADER*7, *8 R06 F06TEL Muting AMP GAIN*10AUX IN*12 AUX OFF More about this unit Windows extension up to 32 characters Menu operations Discs Number of symbols see To remove these rough spots, rub the edges with a KHz to 1 620 kHz Maximum Power Output Front/Rear Per channelMHz to 74.00 MHZ KHz to 279 kHzEnglish References Затруднения при эксплуатации? Для получения информации о перезагрузке Вашего устройстваPrecautions on power supply and speaker Застереження щодо приєднання джерелаПерелік деталей для встановлення та з’єднання Встановлення Електричні З’ЄДНАННЯ Несправності KD-R504 Do not raise the volume level too much, as this will Contents Select the source Remote sensor Enter list operations Enter Menu setting HoldSelect the sound mode FM = AM*2 = CD*3 = USB = AUX IN*2 =Operations Time Preparation Select FM or AM Search for a station to listen-Auto Search Selecting preset station For AMPressPause/resume playback Adjust the volume Adjust the sound as you want see pages 12 Selecting a preset sound mode Title assignment Monaural mode MONO*3 Mono onInitial VOL FADER*4,*5 R06 F06BALANCE*5 ADJ SourceAUX AM stationInk jet printer MP3 files encoded in an inappropriate formatTitle assignment Discs in general MP3/WMA playback Symptoms Remedies/Causes GeneralHave intended them to play Recorded New discs may have some rough spots AM Tuner Sensitivity 20 μV Selectivity 35 dB CD Player Section Having Trouble with operation? When installing the unit without using the sleeve KD-R504Electrical Connections KD-R506/KD-R505/ KD-RC502/KD-RC501 Do not raise the volume level too much, as this will Contents Basic operations Operations Using the remote controller RM-RK50 Preparation Listening to the radio Disc operations Listening to the USB device For more details about USB operations, see Level Title assignment Menu operations If Band Auto AUX IN*9 WMA files which are not based upon Windows Media Audio Title assignment Troubleshooting Numbers, and a limited number of symbols Maintenance Specifications English References EN, TH KD-R506/KD-R505/KD-RC502/KD-RC501 √µ‘¥µ-Èß√ª√-Õ·ºßÀπÈªí∑¡Ï‡¢È √‡ËÕ¡‚¥¬„È‰øøÈ √µ√« Õªí≠À¢-¥¢ÈÕß