~LI#
Include the specified symbology for a label
‘#’ identifies the included symbology:
1 | UPC/EAN |
|
|
2 | Code 39 |
|
|
3 | Code 128 |
|
|
4 | Interleaved 2 of 5 |
|
|
5 | Code 93 |
|
|
6 | Codabar |
|
|
~LL
Report the excluded symbologies and the included symbologies specified for all the defined bar codes.
Hexadecimal value ‘4’ - identifies the beginning of the data packet response
The mode for each symbology is reported in a character string, which terminated with either ‘IN’ (for included) or ‘EX’ (for excluded) followed by a ‘\r’ character (carriage return) and a ‘\n’ character (a line feed). See the example below. The next two columns indicate statuses of the ~LM and ~LN commands respectively. (The ~LM command is not used in normal operation.)
Hexadecimal value ‘5’ - identifies the end of the data packet response
L- the last character of the sent command string Example return using ScanView:
1UPC/EAN- IN
2C39- IN
3C128- IN
4CITF- IN
5C93- IN
6CBAR- IN
min chars: | 032 |
number bc: 099
L
Quick Check® SV Series User’s Guide | 6 - 13 |
