1
2
3
4
(moving bar codes mode) Use for normal operation
(moving bar codes mode, fast code exit)
(reserved)
(stationary bar codes mode)
~HQ#
Transmission Mode
Values for # are:
0Standard mode
1- 9 reserved
~HT
Display the verifier parameters
The format of the reply is, when ~De0 is set: (See ~De# (page
1.~H
2.hexadecimal value ‘4’ - identifies the beginning of the data packet response.
3.A list of text strings like the one shown in the example. Each string is terminated by a two character sequence: ‘\r’ (the carriage return character), ‘\n’ (the line feed character).
4.hexadecimal value ‘5’ - identifies the end of the data packet response
5.T
Example: (The numbers of parameters reported varies with the com- mands included in the firmware revision)
~H
{hex 4}
[~HS###]SOS= 048
[~HP###]Beam Shift= 000 000
[c]HIGHcal= 085
[c]LOWcal= 002
[~Sh##]= 000
6 - 8 | Quick Check® SV Series User’s Guide |
