HandHeld Entertainment SV Series manual Symbology Identifier Table

	Pos	Chars	Parameters
			Three digit number shows total scans-on-
C	67	3	code.
D	70	3	000-999; Good Quiet Zones (scans)
			Two digit number shows Lead QZ. Units:
E	73	2	.1X (00-9A)
			Two digit number shows Trail QZ. Units:
F	75	2	.1X (00-9A)
			One digit number: ‘0’ (off), ‘1’ (on). Sync
G	77	1	state.
			IGC, two bytes: Units of X dimension times
H	78	2	10. Value = 00 when N/A
			Two digits; Percent of good global
I	80	2	thresholds. (00-9A)
			Two digits; Calculated application
J	82	2	checksum value or Code 93 mod check K
			One digit; indicates the subsymbology
			enabled in the y field of ~LFxy command for
			this symbol. A value of 0 indicates no
O	84	1	subsymbology check is enabled.
			One digit; Buffer overrun indication; 0 = no
K	85	1	overrun
L	86	2	Two digits; Decode header indicator "^^"
[chars]	88	...	Bar code data characters (variable length).
			Programmable ASCII character indicates
			end of transmit; See ~SSbbbeee (page 6-
			28) command. LF (line feed) required for
Z	last	1	ScanView.

y* - The symbology identifiers use groups of numbers to identify each symbology. The range of possible values could potentially span 100 for each symbology category. The Symbology Identifier Table lists each identifier group with the corresponding symbology.

*A no read condition is indicated by all four bytes yy, M and N set to 0 in a transmission. All other data is therefore not valid.

See the ~OS# command (page 6-18) for other transmission data formats.

Symbology Identifier Table

Identifiers	Symbology Category
02	I 2 of 5
03	Code 128
04	Code 93

3 - 4 Quick Check® SV Series User’s Guide