TANDBERG D50104-15 For the customers in the USA, Symbols Location This Symbol Indicates

Health Care System III

Warning

While no currently available technology can completely substitute for the in-person physical examination of an individual patient or specimen, the TANDBERG products provide high quality, high resolution, long distance images. When used properly, these Healthcare products can provide a significant and valuable tool for physicians and other medical professionals who are unable to examine a patient or specimen in person. The use and value of the system will vary depending on the specific circumstances of the patient’s condition. Ultimately, judgements on how this tool should be used must be in the individual discretion of physician supervising the patient’s care.

For the customers in the USA

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Important safeguards/notices for use in the medical environments

1)All the equipment connected to this system shall be certified according to Standard IEC601-1 or other IEC/ISO/CSA/UL Standards applicable to the equipment.

2)When this system is used together with other equipment in the patient area*, the equipment shall be either powered by an isolation transformer or connected via an additional protective earth terminal to system ground unless it is certified according to Standard IEC601-1 and IEC601-1-1.

Note: The power outlets provided in the system are powered from an isolation transformer.

*Patient Area

Symbols	Location	This Symbol
		Indicates
		The equipotential
	Rear panel	terminal which brings
	of monitor	the various parts of a
		system to the same
		potential.
	Rear panel	Functional earth
	of monitor	terminal
	Rear panel of	Attention, consult
	monitor and	ACCOMPANYING
	power bar	DOCUMENTS

3)The leakage current could increase when connected to other equipment.

4)The operator should take precautions to avoid touching the rear panel input and output circuitry and the patient at the same time.

5)The main power switch of the system is not easily accessible. To isolate the system from the mains supply remove the mains plug from the wall socket.

4