TANDBERG D50104-15 user manual Video Settings

Health Care System III Advanced Use

Video Settings

NOTE

THE CAMERA TRACKING MODE

ENTRY WILL BE GREYED OUT IF NOT

USING THE WAVE CAMERA.

Camera Tracking Mode

Select the camera tracking mode:

Slow: The system waits a while before zooming in on a single person speaking. Suitable when wide-angle images are preferred over close-up images.

Norm: Should be used in regular meetings.

Fast: The system quickly zooms in on a single person speaking. Suitable when close-ups are preferred over wide-angle images.

Document Camera

Users of a document camera with S-video output can configure the system to activate an S-video input when pressing ‘doc cam’ on the remote control.

Video2: Video Input 2 (S-video) will be activated when pressing ‘doc cam’ on the remote control.

Video3: Video Input 3 (Composite) will be activated when pressing ‘doc cam’ on the remote control.

PC

Configure what should be activated when pressing PC.

VGA: Pressing PC will activate the VGA input on the system (default).

VNC: Pressing PC will use VNC to show images from your PC (see ‘VNC Settings’ for further information).

Focus

To manually adjust the focus select ‘Manual’ and use the arrow keys to adjust.

Brightness

To manually adjust the brightness select ‘Manual’ and use the arrow keys to adjust.

Whitebalance

In Auto mode the whitebalance is continuously updated. To update the whitebalance manually, select ‘Manual’ and press OK.

TIP

A WHITE OBJECT SHOULD BE HELD IN FRONT OF THE CAMERA A FEW SECONDS BEFORE AND AFTER SELECTING MANUAL WHITEBALANCE.

69