TANDBERG D50104-15 MultiSite cascading, Establishing MultiSite meetings using Directory

Models: D50104-15

1 106
Download 106 pages 52.67 Kb
Page 49
Image 49

Health Care System III

General Use

MultiSite cascading

By connecting four MultiSite systems together, it is possible to connect up to 10 video sites (including the four MultiSite sites) plus 4 audio sites (telephones), see drawing below.

The host can connect up to 3 other video systems with MultiSite functionality. The host can use Voice Switched or Continuous Presence mode.

The cascaded systems connect to two other video sites plus one audio site each. These systems will automatically run Voice Switched mode and transmit a full screen image to the host when calling on ISDN. When calling on IP, Voice Switched Mode must be selected manually.

NOTE

ALL CONNECTIONS CAN BE ANY

COMBINATION OF ISDN/IP.

Establishing MultiSite meetings using Directory

It is possible to pre-define meetings using Directory. All sites will then be connected automatically instead of having to add one by one site.

Press DIRECTORY.

Highlight a MultiSite entry and press CONNECT.

See ‘Directory’ section for further information.

49

Page 49
Image 49
TANDBERG D50104-15 user manual MultiSite cascading, Establishing MultiSite meetings using Directory