TANDBERG D50104-15 user manual MultiSite MCU

General Use Health Care System III

MultiSite (MCU)*

The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile).

The video calls in a conference must be connected using the same bandwidth.

A conference can consist of any combination of ISDN/LAN sites.

It is possible to have telephone meetings with up to 5 participants.

The MultiSite supports both Voice Switched and Continuous Presence mode (see ‘MCU Services’ in ‘Advanced use’ for description of these modes).

Establishing a conference is done by first making a call to one site. When a call is established with the first site, the other sites are connected one by one.

It is possible to either dial out to the sites or the sites can dial in to the MultiSite.

TIP

SEE ‘UTILITIES’, ‘CONTINUOUS PRESENCE’ TO CHANGE

MODE.

MULTISITE - WHICH QUALITY CAN BE USED ON EACH SITE?
	4 SITES		4 SITES	3 SITES	3 SITES +	P-TO-P +
(2MBPS VERSION)			+ 1 PHONE		1-2PHONES	1-3PHONES
BRI (768 KBPS)	256	KBPS	192	384	320	512
PRI-E1(1920 K)	512		512	768	768	1472
PRI-T1(1472 K)	384		384	512	512	1152
LAN/MIX (2304 K)	768		768 *	1152	1152 *	1920 *

MIX ISDN/LAN EXAMPLE: IF 4 SITES ARE CONNECTED, TWO LAN SITES AND ONE ISDN SITE CAN BE CONNECTED ON 512 KBPS (2MBPS VERSION)

OR 256 KBPS (768 KBPS VERSION). NOTE - 4 SITES INDICATES YOURSELF + THREE OTHER SITES.

*- REQUIRES 1-3 ISDN CHANNELS AVAILABLE.

NOTE

WHEN MIXING

ISDN AND LAN

SITES, THE TOTAL

BANDWIDTH

LIMATATION IS

THE SAME AS FOR

THE ISDN

BANDWIDTH.

* - Optional feature.

48