Using the remote controller (RM-RK50)

ENGLISH

Installing the lithium coin battery (CR2025)

Caution:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

If the effectiveness of the remote controller decreases, replace the battery.

Before using the remote controller:

Aim the remote controller directly at the remote sensor on the unit.

DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

1• Turns the power on if pressed briefly or attenuates the sound when the power is on.

Turns the power off if pressed and held.

2• Changes the preset stations.

Changes the folder of the MP3/WMA. 3 Adjusts the volume level.

4 Selects the sound mode.

5 Selects the source.

6• Searches for stations if pressed briefly.

Fast-forwards or reverses the track if pressed and held.

Changes the tracks if pressed briefly.

Warning (to prevent accidents and damage):

• Do not install any battery other than CR2025 or its equivalent.

 

• Do not leave the remote controller in a place (such

Remote sensor

as dashboards) exposed to direct sunlight for a long

time.

 

• Store the battery in a place where children cannot reach.

• Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

• Do not leave the battery with other metallic materials.

• Do not poke the battery with tweezers or similar tools.

• Wrap the battery with tape and insulate when throwing away or saving it.

6

Page 124
Image 124
JVC GET0576-001A manual Using the remote controller RM-RK50