JVC GET0576-001A manual Album name, Numbers, and a limited number of symbols

ENGLISH

	Symptoms		Remedies/Causes
	•	Noise is generated.	Skip to another track or change the disc. (Do not add the
			extension code <.mp3> or <.wma> to non-MP3 or
			WMA tracks.)
	• A longer readout time is required		Do not use too many hierarchical levels and folders.
playback		(“READING” keeps flashing on the display).
	• Tracks do not play back in the order you		The playback order is determined when the files are
		have intended them to play.	recorded.
MP3/WMA	• The elapsed playing time is not correct.		This sometimes occurs during playback. This is caused by
	•	“NO FILE” appears on the display.	Selected folder is an empty folder*. Select another folder
			how the tracks are recorded on the disc.
			that contains MP3/WMA tracks.
			* Folder that is physically empty or folder that contains
			data but does not contain valid MP3/WMA track.
	• The correct characters are not displayed		This unit can only display letters (upper case), numbers,
		(e.g. album name).	and a limited number of symbols.
	•	Noise is generated.	The track played back is not an MP3/WMA track. Skip to
			another file. (Do not add the extension code <.mp3> or
			<.wma> to non-MP3 or WMA tracks.)
	• “READING” keeps flashing on the display.		• Readout time varies depending on the USB device.
			• Do not use too many hierarchy or folders.
			• Turn off the power then on again.
			• Reattach the USB device again.
	• “NO FILE” appears on the display.		Selected folder is an empty folder*. Select another folder
playback			that contains MP3/WMA tracks.
			* Folder that is physically empty or folder that contains
			data but does not contain valid MP3/WMA track.
device	• Tracks/folders are not played back in the		The playback order is determined by the write-in time
		order you have intended.	stamp. The first track/folder written into the USB device
USB			will be the first track/folder for playback.
	• “CANNOT PLAY” flashes on the display.		• Attach a USB device that contains tracks encoded in an
	• “NO USB” appears on the display.		appropriate format.
	• The unit cannot detect the USB device.		• Reattach the USB device again.
	• Correct characters are not displayed (e.g.		This unit can only display alphabets (upper case),
		album name).	numbers, and a limited number of symbols.
	• While playing a track, sound is sometimes		The MP3/WMA tracks have not been properly copied into
		interrupted.	the USB device.
			Copy MP3/WMA tracks again into the USB device, and
			try again.

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

24