Replace the button battery (CR2025).
Preparations

Settings and Adjustments Before Use

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt accordingly.

Note :

●If the grip is loose, the camera recorder may fall off resulting in injuries or malfunction.

●Parents should take extra care when your child is using the camera recorder.

Setting up the Remote Control

The remote control comes supplied with batteries when you purchase this product.

To start using, pull out the insulation sheet.

Insulation Sheet

AWB

Remote Control Sensor

Memo :

●To use the remote control, set [Wireless Remote] in the [Others] menu to AOnB. (A Page 74)

●Point the front end of the remote control toward the sensor. Use the remote control within a distance of 5 meters from the camera recorder. The camera recorder may not respond to the remote control operations at some angles.

Replacing batteries

1 Press the lock tab, and pull out the battery holder.

2

Lock Tab

Button Battery

Attaching an External Microphone

You can attach a microphone to the microphone holder. The supplied microphone is a phantom microphone.

1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder.

2 Place the microphone in the microphone holder.

3 Turn the knob on the microphone holder clockwise to secure the microphone.

4 Connect the microphone to the [INPUT1] or [INPUT2] (XLR) terminal according to the type of microphone cable terminal you are using.

5 Attach the microphone cable to the clamp.

6 Specify the audio input settings correctly. (A Page 38)

1.3. Knob

2. Microphone

5. Clamp

Microphone Holder

4.[INPUT1/INPUT2] Terminals

AUDIO

IN

OPEN

Attaching the Tripod

To prevent the camera recorder from falling off, which may result in injuries or damages, read the instruction manual of the tripod to be used and make sure that it is securely attached. (A Page 12)

Note :

●Use the tripod on a stable surface.

15