Camera Features

Restoring the SDHC/SDXC Card

Applicable to: Camera mode

Restoring the SDHC/SDXC Card

It is necessary to restore the SDHC/SDXC card if an abnormality occurs to the data in the card due to some reasons.

A A! RESTOREB message appears at the remaining media display area when an SDHC/SDXC card that requires restoring is inserted.

Memo :

●The message ARestore MediaB appears on the LCD monitor/viewfinder screen when an SDHC/SDXC card that requires restoring is inserted while the thumbnail screen is displayed. To cancel the message display, press the center of the set lever.

1 Select [Restore Media] in the [Media] menu. (A Page 75)

2 Select the SDHC/SDXC card to be restored and press the center of the set lever.

2

3 Restoring starts.

4 Restoring is complete.

●When restoring is complete, ACompleteB appears and the camera recorder returns to the [Restore Media] screen.

●When no media that requires restoring is inserted, the camera recorder returns to the [Media] menu screen.

Note :

●[Restore Media] can only be selected in Camera mode. However, it cannot be selected while the camera recorder is recording. Select [Restore Media] in Camera mode when the camera recorder is not recording.

●[Restore Media] does not restore the SDHC/SDXC card to its original states completely. If restoring fails, replace or format the SDHC/SDXC card. Take note that formatting the SDHC/SDXC card erases all information inside.

Memo :

●Restoring cannot be performed in the following cases.

•SDHC/SDXC card is not inserted.

•Write-protect switch of the SDHC/SDXC card is set ( is displayed).

•Restoring is not required.

92