JVC GY-HM150E, GYHM150U, GY-HM150U Switch Set Item, Menu Display and Detailed Settings

Menu Display and Detailed Settings

Camera Function Menu (continued)

Switch Set Item

* Default values are indicated in bold characters.

Item		Setting Values			Function
FAW	None			For assigning the FAW (Full Auto White Balance) function to a position on the [WHT.BAL]
	PRESET			selection switch.
				The white balance mode is fixed at AFAWB when the [FULL AUTO] button of the camera recorder
	A
				is set to AONB.
	B
				None	: FAW function is not assigned.
				PRESET	: Assigns FAW to the PRESET position.
				A	: Assigns FAW to the A position.
				B	: Assigns FAW to the B position.
GAIN L	AGC, 18dB, 15dB,			For setting the gain value of each position on the [GAIN] selection switch.
GAIN M	12dB, 9dB, 6dB, 3dB,			This is fixed at AAGCB when the [FULL AUTO] button of the camera recorder is set to AONB.
	0dB			(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB)
GAIN H
Zoom Speed	-2,-1			For setting the speed of zoom operation with the set lever (on the LCD monitor) and remote
	Normal			control.
	1			A-2Bis the slowest setting and A1B is the fastest setting.
USER1	By assigning one of the following functions to each of the [USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/[ZEBRA/5]/[REC/
USER2	6] buttons, these buttons can be used to control the assigned function (on/off, start, switch).
	Set according to the shooting conditions. Usable only in the Camera mode.
LOLUX/3	(Default values USER1: Focus Assist, USER2: TC/UB, LOLUX/3: Lolux, C.REVIEW/4: Clip Review, ZEBRA/5:
C.REVIEW/4	Zebra, REC/6: Rec)
	Memo:
ZEBRA/5
	● The [REC/6] button is set to ARecB by default, and can be used to start/stop recording. The ARecB function can only
REC/6		be assigned to the [REC/6] button.
		Setting Values			Description
		None		No function is assigned.
		Load File		Assigns the function of [Load Scene File] in the [Setup File Manage] menu. (A Page 75)
		OK Mark	Assigns the function of appending/deleting OK marks while recording a clip. This function
				operates during shooting. (A Page 41)
		Clip Cutter Trig	Assigns the function of splitting clips freely during recording. (A Page 41)
				Memo:
				● This item cannot be used when [Slot Mode] is set to ABackupB. (A Page 64)
				● This item cannot be used when [Rec Mode] is set to a value other than ANormalB or APre
				RecB. (A Page 64)
		Backup Trig		Assigns the function of [Backup Rec] in the [Slot Mode] menu. (A Page 64)
		AE Area	Assigns the function of [AE Area] in the [Camera Function] menu. (A Page 65)
		Clip Review	Assigns the Clip Review function. (A Page 28)
		Rec Stop		Assigns the function to stop recording. This function operates during recording only.
				Memo:
				● When the [Rec Mode] menu is set to AClip ContinuousB or AFrame RecB, it is useful to use
				this as the stop button. (A Page 64)
		Zebra		Assigns the function of [LCD/VF] menu B[Shooting Assist]B[Zebra]. (A Page 70)
		Lolux		For switching the low-light shooting mode ON or OFF.
		Tele Macro	Assigns the function of [Tele Macro] in the [Camera Function] menu. (A Page 65)
		TC/UB		Opens the [TC/UB] menu directly. (A Page 69)
		Bars	Assigns the function of [Bars] in the [Camera Function] menu. (A Page 65)
		Focus Assist	Assigns the function of [LCD/VF] menu B[Shooting Assist]B[Focus Assist]. (A Page 70)

66