In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one AclipB on the SDHC/SDXC card.
In this mode, recording starts with every press of [REC], and only the specfied number of frames is recorded. The recording can be written to the media as a single clip until it is stopped.
4 Resume recording. (Recording 2)
●Press the [REC] button again to resume recording. The display changes from ASTBYCB (yellow text) BARECCB.
●The card slot status indicator continues to blink in green.
5 Pause recording.
●Press the [REC] button again to pause recording. The display changes from ARECCBBASTBYCB (yellow text).
●The card slot status indicator continues to blink in green.
6 Resume recording. (Recording 3)
●Press the [REC] button again to resume recording. The display changes from ASTBYCB (yellow text) BARECCB.
●The card slot status indicator continues to blink in green.
7 Press and hold the [REC] button or press the user button that is assigned with ARec StopB to stop the recording. (A Page 19)
●Recording stops and the display changes from ARECCBBASTBYCB. A AclipB is generated.
●The card slot status indicator lights up in green.
8 Press the [REC] button again.
●The status display changes from ASTBYCBBARECCB and the card slot status indicator blinks in green.
●A new AclipB is generated from here.
Memo :
●Audio cannot be recorded.
●Until a specified amount of recordings is accumulated, the file will not be written to the media.
●If the specified amount is not reached when recording is stopped, normal recording is performed and frames are added to the ending of the clip until the amount is reached. (Padding)
●After the specified number of frames is recorded and written to the media, recording will be performed until the same number is accumulated again.
Press [REC] |
|
| Press and hold [REC] | ||||||
(Frame Rec starts) |
|
| (Frame Rec stops) | ||||||
|
| Press [REC] | Press [REC] |
|
| ||||
|
|
|
| ||||||
|
| Recording resumes | Recording resumes |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Normal recording |
Pause | Pause | Pause | (Padding data) | |||
Recording of specified number of frames in [Rec Frames]
Actual clip recorded to media
Memo :
●The following operations cannot be performed while recording is paused (STBYC, yellow text).
•Clip Review operation (A Page 28)
•Switching SDHC/SDXC card slots
•Switching operation mode (A Page 13)
Note :
●Do not remove the SDHC/SDXC card during recording (RECC, red text) or recording pause (STBYC, yellow text).
●To remove the SDHC/SDXC card in AClip ContinuousB mode, press the user button assigned with ARec StopB or press and hold the [REC] button, check that ASTBYCB (white text) is displayed and the card slot status indicator is lighted in green before you remove the card.
●When the SDHC/SDXC card becomes full during recording, recording stops and ASTOPB is displayed.
●When the power is turned off during recording or recording pause, recording stops and power is cut off after a clip is generated.
●If the power is cut off due to low battery power, a proper clip may not be generated.
Specified amount of data
1 Set [Rec Mode] to AFrame RecB.
●Set [Main Menu]B[Record Set]B[Rec Mode] to AFrame RecB. (A Page 64)
●The status display changes from ASTBYBBASTBYFB.
2 Set the number of frames to record in [Rec Frames].
Set using [Main Menu]B[Record Set]B[Rec Frames]. (A Page 64)
3 Start recording.
●Press the [REC] button to record only the number of frames specified in [Rec Frames] and pause.
●The status display changes from
ASTBYFBBARECFBBASTBYFB (yellow text).
●The card slot status indicator blinks in green.
46