1 Set [Slot Mode] in the [Main Menu]B[Record Set] menu to ABackupB. (A Page 64)
A ABACKUPB display appears on the status display screen.
STATUS 1 Screen
2 Start backup recording. (Backup recording in slot B)
●Select [REC] in [Main Menu]B[Record Set]B[Backup Rec] and press the center of the set lever. (A Page 64)
(You can also press the user button that is assigned with ABackup TrigB. (A Page 66))
●Backup recording into slot B starts. (The characters ABACKUPB appear in red.)
●The card slot mark of slot B turns red (selected state), and the status indicator of slot B also blinks in green.
Red
Red (selected state)
3 Start normal recording. (Normal recording in slot A)
●Press any of the [REC] buttons.
●Recording into the media in slot A starts. (The characters ARECB appear in red.)
●The card icon of slot A turns red (unselected state), and the status indicator of slot A also blinks in green.
Red (unselected state)
4 Stop normal recording.
●Press any of the [REC] buttons again.
●Recording to slot A stops, and the card slot mark of slot A turns white (unselected state).
●The characters ARECB (red) changes back to ASTBYB (white).
●The status indicator of slot A goes out.
White (unselected state)
5 Stop backup recording.
●Select [STBY] in [Main Menu]B[Record Set]B[Backup Rec] and press the center of the set lever. (A Page 64)
(You can also press the user button that is assigned with ABackup TrigB or ARec StopB. (A Page 66))
●Recording to slot B stops, and the card slot mark of slot B turns white (unselected state).
●The characters ABACKUPB changes back to white.
●The status indicator of slot B lights up in green.
White
Memo :
●During backup recording, if the space of one card runs out, recording stops only for the card that is full.
●When recording to both slots is stopped, recording in the Regen mode will be enabled for the card slot in which recording started.
●When recording is started in the other slot while recording to one slot, the clip being recorded is split and simultaneous recording to the other card starts.
●When recording is stopped for either slot A or B while recording to both slots, the clip on the slot which is still recording is split.
●Although the clips are separated in this case, the clips can be seamlessly joined by arranging them on the timeline of the editing software since they are recorded seamlessly.
●Clip Cutter Trig cannot be performed during backup recording. (A Page 41)
●When [Slot Mode] is set to ABackupB, [Rec Mode] can only be set to ANormalB. (A Page 64)
44