Viewing Images on a
Monitor
Applicable to: Camera mode, Media mode
There are three video output terminals on this camera recorder.
Choose the most suitable terminal according to the monitor in use.
: Outputs composite video and audio signals. | |
Terminal |
|
: Outputs component video signals. Audio sound | |
OUT] Terminal | is not output. Set the resolution in [Component |
| |
: Outputs HDMI signals. | |
Terminal | Configure the settings in the [A/V Out] menu to |
| match the monitor to be connected. [HDMI |
| |
|
SHUTTER |
| |||
|
| IRIS |
|
|
OUT] |
|
|
| |
|
|
| ||
T PR |
| AE |
| REC |
|
| |||
REC |
| ADJ./ VOL. | PUSH | |
|
|
|
| |
|
|
|
| DC |
Component | HDMI Cable |
AV Cord |
Cable
(Optional)
*1
Component | AV Input | HDMI |
| ||
Video Input |
|
|
*1 : When the component terminal is used, the video terminal of the AV cord will not be used.
Output is as follows when two or more terminals are connected at the same time.
●The [HDMI] terminal always outputs video and audio sound.
●When both the [COMPONENT OUT] and [A/V OUT] terminals are connected, video is output from the [COMPONENT OUT] terminal, while audio sound is output
from the [A/V OUT] terminal.
●When both the [HDMI] and [COMPONENT OUT] terminals are connected, the signal selected in the [HDMI Output] menu instead of the analog component signal set in the menu is output from the [COMPONENT OUT] terminal.
●When both the [HDMI] and [A/V OUT] terminals are connected, video is output from the [HDMI] terminal, and audio sound is output from both terminals.
Memo :
●Be sure to use the supplied component cable.
●You can specify the following items in the [A/V Out] menu. [Video Output]: For adjusting the display size on the monitor. (4:3 or 16:9)
[Display On TV]: For specifying whether to enable on- screen display.
●When the [HDMI], [COMPONENT OUT] or [A/V OUT] terminal is connected, video images will not appear on the viewfinder.
●When the [HDMI], [COMPONENT OUT] or [A/V OUT] cable is inserted or removed, noise may appear in the LCD monitor or viewfinder, but this is not a malfunction. It does not affect the recorded images.
Wired Remote Control Connection
Applicable to: Camera mode
The functions of the camera recorder can be configured using a wired remote control.
1 Connect a wired remote control to the camera recorder.
Connect the wired remote control (sold separately) to the [REMOTE] terminal of this camera recorder.
REMOTE
[REMOTE] Terminal
Connect the wired remote control
Note :
●Turn off the power of the camera recorder when connecting a wired remote control.
2 Turn on the power of the camera recorder.
91