Write-Protect Switch on the SDHC/SDXC Card

ASlide the write-protect switch upward to enable writing or deleting.

BSlide the write-protect switch downward to prevent writing or deleting. (Data in the card are protected.)

Write-Protect Switch

AB

Write/Delete Enabled

Write/Delete Disabled

Card Slot Status Indicator

The following table shows the respective states of slot A and B.

Lamp

Slot Status

 

Blinks in green

Inserted SDHC/SDXC card is being accessed.

 

 

(writing/reading data)

 

 

Do not turn off the power of the camera

 

 

recorder or remove the SDHC/SDXC card.

 

 

 

 

Lights up in green

On standby. Inserted SDHC/SDXC card can

 

 

be used for recording or playback.

 

 

 

 

Light goes out

SDHC/SDXC card is not inserted.

 

 

An unusable card is inserted.

 

 

An SDHC/SDXC card is inserted but a

 

 

different slot is selected.

 

 

 

 

 

 

 

 

 

 

Formatting (Initializing) SDHC/SDXC Cards

When the following cards are inserted, AFORMATTING REQUIREDB appears. Format the card using the camera recorder menu.

Unformatted SDHC/SDXC cards

SDHC/SDXC cards formatted under different specifications

Note :

Be sure to format the SDHC/SDXC card on this camera recorder. SDHC/SDXC cards formatted on a PC and other peripheral equipment cannot be used on this camera recorder.

Memo :

To cancel the message display, press the center of the set lever.

A [!] mark and the message AFORMATB appear at the remaining media area when an SDHC/SDXC card that requires formatting is inserted.

1 Select [Format Media] in the [Media] menu. (A Page 75)

2 Select the slot of the SDHC/SDXC card to be formatted and press the center of the set lever.

2

3 The status of the selected SDHC/SDXC card appears. 4 Select [Format] and press the center of the set lever.

4

5 Formatting starts.

6 Formatting is complete.

ACompleteB appears when formatting is complete.

Memo :

If you do not want to format the card, select [Cancel] and press the center of the set lever to return to the previous screen.

If you remove the SDHC/SDXC card during formatting,

AFormat Error!B appears and the camera recorder returns to the previous screen.

During formatting, menu operation is unavailable but you can start recording. However, this is only available when a recordable SDHC/SDXC card is inserted in the other slot.

Formatting cannot be performed in the following cases.

Recording is in progress on the SDHC/SDXC card to be formatted.

SDHC/SDXC card is not inserted.

Write-protect switch of the SDHC/SDXC card is set ( is displayed).

Note :

If you format the SDHC/SDXC card, all data recorded on the card, including video data and setup files, will be deleted.

21