Shooting

Audio Recording

Applicable to: Camera mode

There are two ways to input audio sound.

ABuilt-in microphone

B[INPUT1] terminal / [INPUT2] terminal

●The priority order of the input is in the sequence of B > A.

●To use the built-in microphone, remove the audio unit cable from the [AUDIO IN] terminal.

B[INPUT1/INPUT2] Terminals

A Built-in Microphone

Audio Unit Cable

REMOTE

Setting the Reference Audio Recording Level

Applicable to: Full Auto shooting mode A, Manual shooting mode M

Set using [Record Set] menu B[Audio Set]B[Audio Ref. Level]. (A-20dBB/A-12dBB)

(A Page 65)

Using the Built-in Microphone

Applicable to: Full Auto shooting mode A, Manual shooting mode M

Setting the input level.

Set using [Record Set] menu B[Audio Set]B[Internal Mic Level]. (A Page 65)

Using an External Microphone Connected to the [INPUT1/INPUT2] Terminal

Applicable to: Full Auto shooting mode A, Manual shooting mode M

Preparation: Connect a microphone to the [INPUT1/INPUT2] terminal.

(A Page 15)

Terminal

Audio Input

[INPUT1]

Input to [CH1(L)] at all times. Input to [CH2(R)] can be

 

enabled using the [CH-2 INPUT] switch.

 

 

[INPUT2]

Input to [CH2(R)] can be enabled using the [CH-2

 

INPUT] switch.

 

 

Selecting [CH-2]audio

Configure the [CH-2 INPUT] switch.

●[INPUT1]: Inputs the audio from the [INPUT1] terminal to [CH-2].

●[INPUT2]: Inputs the audio from the [INPUT2] terminal to [CH-2].

Memo :

●The audio from the [INPUT1] terminal is input to [CH-1]regardless of the setting.

Selecting the audio input to the [INPUT1] or [INPUT2] terminal

Configure the [AUDIO INPUT 1/2] switch.

[LINE]

Use this setting when connecting to an audio

 

device or other equipment.

 

 

[MIC]

Use this setting when connecting to a

 

dynamic microphone.

 

 

[MIC+48V]

Use this setting when connecting to a

 

microphone that requires a +48 V power

 

supply (phantom microphone), or when using

 

the supplied microphone.

 

 

Caution :

●When connecting a device that does not require a +48 V power supply, make sure that it is not set to the [MIC+48V] position.

Adjusting the audio recording level

Select a method for adjusting the audio recording level.

●Configure the [CH1/CH2 AUDIO SELECT] switch.

●Select whether to set each channel to the [AUTO] or [MANUAL] mode.

[AUTO]

: Use this setting to enable the auto

 

adjustment mode.

 

 

 

 

[MANUAL]

: Use this setting to enable the manual

 

adjustment mode. Adjust the audio

 

recording level using the [CH1/CH2 AUDIO

 

LEVEL] knob.

 

 

 

 

 

[CH1/CH2 AUDIO SELECT] Switch

 

 

 

 

AUTO MANUAL

2

 

 

CH-2 INPUT AUDIO INPUT

CH-1

3

 

[CH-2 INPUT]

4

 

 

- MIC -

SELECT

5

 

 

INPUT1

- LINE -

AUDIO

 

 

Switch

INPUT2

MIC+48V

CH-2

0

 

INPUT1 INPUT2

32

 

 

 

 

 

1

 

 

 

 

AUTO MANUAL

 

 

[AUDIO INPUT 1/2] Switch

 

 

 

[CH1/CH2 AUDIO LEVEL] Knob

Reducing Wind Noise

Wind noise for each microphone can be reduced.

Menu setting

Set [Record Set] menu B[Audio Set]B[Input1 Mic Wind

Cut]/[Input2 Mic Wind Cut]/[Internal Mic Wind Cut] to AOnB. (A Page 65)

38