JVC HM-DR10000EK setup guide Minimizing Picture Degradation While Editing, Access Mode SET Screen

Minimizing

Picture

Degradation

While Editing

(S-VHS/VHS Mode Only)

Turn on the TV and select the AV mode.

45

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

ACCESS MAIN MENU
SCREEN
1 Press MENU.
ACCESS MODE SET
SCREEN
Move the highlighted bar (pointer) to "MODE SET" by
2 pressing %Þ, then press OK or #.
SELECT PICTURE
CONTROL SET MODE
Move the highlighted bar	MODE SET
(pointer) to "PICTURE	B. E. S. T.	ON
3 CONTROL" by pressing
	PICTURE CONTROL	AUTO

1

2

1

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

3

MENU

OK

%Þ, then press OK or #to		AUTO TIMER	OFF
select the desired mode.		O. S. D.	ON
		DIRECT REC	ON
AUTO: Provides		AUTO SP=LP TIMER	OFF
	optimised picture	DIGITAL 3R	ON
		NEXT PAGE
	benefits of B.E.S.T.
		[5°] =
	Picture System.	[MENU] : EXIT
	Normally select
	AUTO.
EDIT:	Minimizes picture degradation during editing
	(recording and playback).
SOFT:	Reduces image coarseness when viewing
	overplayed tapes containing a lot of noise.

2

Advantages Of S-VHS Video Recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

SHARP: Clearer, sharper-edged picture when viewing

images with lots of flat, same-coloured surfaces

such as cartoons.

NOTES:

♦When you select EDIT, SOFT or SHARP, the selected mode will not change until you select again.

♦When you select EDIT to dub tapes, be sure to select AUTO after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTES:

●When B.E.S.T. is OFF, "PICTURE CONTROL" switches automatically from AUTO to NORM.

●Select EDIT when you are dubbing tapes. Refer to page 48.