JVC HM-DR10000EK setup guide TV Receiver AV mode, Your recorder, Another recorder, Recorder Player

					49
A			B
TV Receiver					TV Receiver
(AV mode)	Player	Your recorder	Recorder	Your recorder	(AV mode)
		21-pin SCART	21-pin SCART Cable		21-pin SCART Cable
		Cable (provided)		(provided)
					(not provided)
21-pin SCART Cable
(not provided)
	Another recorder		Another recorder
	Recorder		Player
C
TV Receiver	Recorder
(AV mode)		Your recorder
	S-Video Cable	21-pin SCART
		Cable (provided)
	(provided)
21-pin SCART Cable
(not provided)
	Another recorder
	Player
NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (☞ pg. 47).

●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.

When Using Your Video Recorder As The Source Player ...

... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors. When Using Your Video Recorder As The Recording Deck ...

... connect its rear panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to "S-1".