JVC HM-DR10000EK Step Auto SET UP, Before performing the following procedure, make sure that

AUTO SET

PLEASE WAIT

8

QUICKSETUPGUIDE(cont.)

STEP

3

AUTO SET UP

SET THE TUNER CHANNELS, CLOCK AND GUIDE PROGRAM NUMBERS

The Auto Set Up function sets the tuner channels, clock and Guide Program numbers assigned by the VIDEO Plus+ system automati-

cally the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet.

Before performing the following procedure, make sure that:

■the TV aerial cable is connected to the recorder.

■the mains power cord is plugged into the mains outlet.

■batteries have been installed in the remote control.

			1
			2
1		– –:– –
2
1	2	3
4	5	6	3
7	8	9	4
			4
	0
1			3
2

Press to turn on the recorder.

If "Auto" appears on the display panel,

press OK or #. "Auto" blinks; do NOT press any button on the recorder or remote control until the display panel shows clock time, "(PR) 1" or

"– –:– –" as illustrated on page 10. Auto Set Up usually takes about 4 – 12 minutes; the duration varies by area.

●If you are using the on-screen display, the AUTO

SET screen will appear. As Auto Set Up progresses, the " " mark on the screen moves from left to right.

0 + + +

[MENU] : EXIT

BeginningEnd

ATTENTION

Once you have performed Auto Set Up, all the stored stations and Guide Program numbers remain in the recorder's memory and the recorder will not perform Auto Set Up again. If there is a power cut and the recorder's memory backup expires you only need to reset the clock. (☞ pg. 66)

If you have moved to a different area, perform each setting as required.

■Tuner setting ☞ pg. 58

■Clock setting ☞ pg. 66

If a new station begins broadcasting in your area, perform tuner setting (☞ pg. 58).

NOTES:

●Auto channel set function takes place first; it assigns automatically all receivable stations in your area.

●Auto clock set function sets the clock automatically.

●During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory, then automatically sets the Guide Program numbers assigned by the VIDEO Plus+ system for those stations according to the broadcast area.

●If there is a power cut or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be inter- rupted; be sure to turn off the recorder power once and

press to turn the power back on in order to re-start Auto Set Up.