JVC HM-DR10000EK setup guide Video Plus+, Access Video PLUS+ Screen, Enter Pluscode Number

18BASICOPERATIONS(cont.)

®		With the VIDEO Plus+ system, timer programming is greatly
		simplified because each TV programme has a corresponding
VIDEO Plus+		code number which your recorder is able to recognise.
Timer Programming
	1		ACCESS VIDEO PLUS+ SCREEN
			Press PROG.	VIDEO PLUS+

Before performing the VIDEO Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder

will come on automatically.
		[0 – 9] : VIDEO PLUS+
● Set the appropriate recording mode (D-VHS, S-VHS or		[+/–] : EXPRESS PROGRAMING
VHS) (☞ pg. 14, 15).		[PROG] : EXIT
● Turn on the TV and select the AV mode.	The front display panel looks like this:

TIMER	ENTER PLUSCODE NUMBER
	Press the NUMBER keys to	VIDEO PLUS+
	enter the PlusCode number
		1 2 3 4 5 6 7 8
	2 of the programme you
ä TIMER indicator	wish to record, then press
	OK.

								● If you make a mistake,
LCD panel								press	and input the	[0 – 9] =
								correct number.		[ ] : DELETE
										[PROG] : EXIT
								The PlusCode number you enter appears on the front
1								display panel:
		1		– –:– –
LCD PROG		1	DAILY2	WEEKLY
				3
		2
2		4	5	6	3		2	The display panel shows only a 4-digit number.
NUMBER							7 4
5 PDC		7	8	9	4			ACCESS VIDEO PLUS+ PROGRAM
					4
			0
					STD/LS3 (SP/LP)			SCREEN
1,6		1			3	OK	2,6	The VIDEO Plus+ Program			– P1 –
	PROG							screen appears (if you’re		VIDEO PLUS+ 123456789
		2						just starting out, “P1”		START	STOP
					STOP+/–			3 appears).		21:00	= 22:00
								The display panel shows the		SP(STD)	VPS/PDC OFF
										DATE	TV PROG
								programme start time.
										25.12	1
You can use the remote control with LCD panel to enter the								Pressing	changes the		BBC 1
								display to the programme
PlusCode number.										: OK
								stop time, then the date and
	ACCESS VIDEO PLUS+ DISPLAY							preset position.
1
	Press LCD PROG.									SP
	The LCD panel looks like this:
								IMPORTANT
	ENTER PLUSCODE NUMBER							Make sure the preset position number you wish to
2								record is displayed; if not, see "VIDEO Plus+®
	Press the NUMBER keys to enter the PlusCode number of							Setup" on page 65 and set the Guide Program
	a programme you wish to record, then press .							number for that PlusCode number correctly.
	● If you make a mistake, press				and input the correct			● If the number you entered is invalid, "ERROR" appears
	number.							on the screen and "Err" appears on the display panel.
	The PlusCode number you enter appears on the LCD panel:
								Press	and input a valid PlusCode number.
								● If the "GUIDE PROG SET" screen appears, see
								"ATTENTION – Regarding Guide Program Number
								Set" on page 19.

Then go to step 3 in the right column.