4 | SET TAPE SPEED | |
| ||
Press STD/LS3 ( | ) to set the tape speed. | |
| Press SP/LP ( | ) to set the tape speed. |
5 | SET PDC MODE |
Press PDC to select "ON" or "OFF". | |
If "VPS/PDC ON" is displayed on the screen or "VPS/ | |
PDC" is lit on the display panel, PDC is set to ON. | |
| If "VPS/PDC OFF" is displayed on the screen or "VPS/ |
| PDC" is not lit on the display panel, PDC is set to OFF. |
| ☞ "PDC Recording" in the column below. |
| ● VPS (Video Programme System) recording is not |
| currently available in the U.K. and not possible with |
| this recorder. |
| RETURN TO NORMAL SCREEN |
| Press PROG or OK. "PROGRAM COMPLETED" appears |
6 on the screen for about 5 seconds, then normal screen | |
19
Satellite Receiver Users
To
1 Set "AV2 SELECT" to the appropriate mode. (☞ pg. 50) 2 Perform steps 1 – 7.
3 Set the satellite receiver to the appropriate channel before the selected programme begins.
4 Leave the satellite receiver's power on.
ATTENTION
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the PlusCode number you entered has not been set.
● Press the NUMBER keys or %Þ to input the preset position number on which your recorder receives that station, then press OK or # to set the Guide Program Number. The VIDEO Plus+ Program screen appears.
| appears. |
|
|
| ● Repeat steps 1 – 6 for each additional programme. |
|
|
| ENGAGE RECORDER’S TIMER |
7 | MODE |
Press ä (or äTIMER). The recorder turns off automati- | |
cally and ä appears on the display panel. The äTIMER | |
indicator on the recorder also lights up. | |
| |
| ● To disengage the timer, press ä (or äTIMER) again. |
GUIDE PROG SET
GUIDE PROG | TV PROG |
2 | – – |
[5°] = |
|
[PROG] : EXIT |
|
(Ex.) To
*If your recorder receives BBC2 on the preset position 2, press OK or #after entering "2".
NOTES:
●To Change The Stop Time . . .
. . . press STOP +/– in step 3. You can compensate for anticipated programme schedule delays this way.
●To Timer-Record Weekly Or Daily Serials . . .
. . . in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday
– Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.
●You can programme this recorder to
●It is not possible to
PDC Recording
Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times which you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed from what has been advertised. PDC is currently available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay transmitters. Ch.3 operates a PDC service in some areas. All channels intend to offer this service in due course. Check your TV programme listing guide for latest informa- tion. If the channel you intend to record does not offer a PDC service your recorder will not start recording if PDC has been selected. Be sure to set PDC to "OFF" if PDC is not available on your selected channel (☞ step 5 above).
NOTES:
●PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 IN/DECODER on your recorder.
●PDC recording is also possible via the AV1 IN/OUT connector.
