JVC HM-DR10000EK setup guide Express Timer Programming, Start Time, Enter Programme Date

20BASICOPERATIONS(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Set the appropriate recording mode (D-VHS, S-VHS or VHS) (☞ pg. 14, 15).

●Turn on the TV and select the AV mode.

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS VIDEO PLUS+
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re			– P1 –
	just starting out, “P1”		START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP(STD)		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =
		[PROG] : EXIT
	The front display panel looks like this:
		SP

1– –:– –

ENTER PROGRAMME

2

8

1

DAILY2

3

START TIME

DC

1

1,9 PROG 2

4

7

5

8

0

6

9

3

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30- minute increments, or press and release repeatedly to move 1 minute at a time.

		– P1 –
	START			STOP
	21:00	=		– –:– –
	SP(STD)		VPS/PDC OFF
	DATE			TV PROG
	– –.– –				– –
[+/–] =
[PROG] : EXIT

START+/–

WEEKLY

3

4	10
4

STD/LS3 (SP/LP) 7

3 OK 9

TV PROG+/– 6

The front display panel looks like this:

2,3		–
	4	STOP+/

DATE+/– 5

4

5

SP

ENTER PROGRAMME STOP TIME

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

ENTER PROGRAMME DATE

Press DATE +/– to enter the date on which you wish to record. (The current date first appears on screen. The date you enter will appear in its place.)