JVC HM-DR10000EK setup guide Video Plus+ Setup, Guide Program Number Set

[5°] = [MENU] : EXIT

(Ex.) If CH4 is received on preset position 4.

65

VIDEO Plus+® Setup

IMPORTANT

Normally, Auto Set Up (☞ pg. 8), Preset Download (☞Ê pg. 9) or Auto Channel Set☞( pg. 58) sets the Guide Program Numbers automatically. You need to set the Guide Program Numbers manually only in the following cases.

●When timer-programming with the VIDEO Plus+ system, the preset position, where the station you wish to record is received on your recorder, is not selected or when you add a channel after Auto Set Up or Auto Channel Set has taken place.

— Set the Guide Program Number for that station manually.

●When you delete a channel or change preset positions manually after Auto Set Up or Auto Channel Set has taken place.

— Set the Guide Program Numbers for all the receivable stations manually.

●When you wish to timer-record a satellite programme with the VIDEO Plus+ system.

— Set the Guide Program Numbers for all satellite broadcasts received on your satellite receiver.

Turn on the TV and select the AV mode.

Guide Program Number Set

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS INITIAL SET
2	SCREEN
	Press %Þ to move the highlight bar (pointer) to
	"INITIAL SET", then press OK or #.
	ACCESS GUIDE PROG SET
3	SCREEN
	Press %Þ to move the highlight bar (pointer) to "GUIDE
	PROG SET", then press OK or #.
	ENTER GUIDE PROG
4	NUMBER
	Press %Þ or NUMBER			GUIDE PROG SET
	keys to enter the Guide
	Program number for the
	desired station as shown in		GUIDE PROG		TV PROG
	the TV listings. Then press
				4	5
	OK or #.
		[5°] =
			[MENU] : EXIT
		(Ex.) When inputting the
				Guide Program
				number 4 for CH4.

ENTER RECEIVING PRESET POSITION NUMBER

Press %Þ or NUMBER		GUIDE PROG SET
keys to input the number
5 of the recorder's preset
position on which the	GUIDE PROG		TV PROG
Guide Program number's
		4	4
broadcast is received.
			CH4
Then press OK or #.

● If the satellite broadcast is received on your recorder's auxiliary channel "L-1" or "L-2",

select "L-1" or "L-2" for the channel position, depending on the connection to the satellite receiver (☞ pg. 40).

• Repeat steps 4 and 5 as necessary.

RETURN TO NORMAL

SCREEN

6 Press MENU.

Guide Program Number

"Guide Program (GUIDE PROG) number" refers to the assigned TV station numbers, according to broadcast area, for the VIDEO Plus+ timer recording. The Guide Program numbers can be found in most TV listings.