JVC HM-HDS1U SET Remote Control Code, Transmit the NEW, Confirm the Setting, Code to the Recorder

Control Four JVC VCRs

The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and the other set to respond to B, C, D code control signals. The remote control is preset to send A code signals because your recorder is initially set to respond to A code signals. You can easily modify your recorder to respond to the other code signals.

EN85

SET REMOTE CONTROL

CODE

2 Press and hold HDD on the remote control until “A” starts blinking on the display window of the remote control.

VIDEO A

HDD 1

2

1 2 3

4 5 6

7 8 9

< 0 >

1

2

POWER

3

4

OK

ENTER REMOTE CONTROL

CODE

Press one of the following buttons to enter the desired

cord, then press OK. The current setting code of the

3 remote control appears on the display window.

2: sets the remote control code to “B”

3: sets the remote control code to “C”

4: sets the remote control code to “D”

1: sets the remote control code to “A”

VIDEO C

Ex. When pressing 3.

PREPARE THE RECORDER

FOR RECEIVING CONTROL

CODE

STOP

–+

	POWER
POWER	PLAY	EJECT
		DIGITPURE TECHNOLOGY

HM-HDS1

REC LINK		STOP	PLAY	PAUSE	REC	S-VHS ET
		HDD				S-VHS		VIDEO	(M) L – AUDIO – R
MENU	NAVI					REW	FEW
OK									S-VIDEO
	CH					A. DUB			PAUSE
								F - 1

4	1) To turn off the unit, press POWER on the front panel.
	2) Press PLAY on the front panel for 5 seconds. The
	current setting code of the unit appears on the
	display.
		A
	TRANSMIT THE NEW
	CODE TO THE RECORDER
	Press STOP on the remote control. The new code is
	transmitted to the unit and blinks for about 5 seconds
5 on the display, then the clock time appears.
		C
	CONFIRM THE SETTING
	Press POWER on the remote control. When the unit is
	turned on, the setting is complete. If the unit is NOT
6 turned on, repeat from step 1.

1

TURN ON THE RECORDER

Press POWER.