JVC HM-HDS1U manual Edit From a, Camcorder

76EN

EDITING(cont.)

You can use a camcorder as the player and your recorder as the recorder.

Edit From A			1		MAKE CONNECTIONS
					Connect an AV cable between the camcorder’s VIDEO
Camcorder					● If connecting a camcorder with an S-VIDEO output
				OUT and AUDIO OUT connectors and your recorder’s
				VIDEO IN and AUDIO IN connectors.
					connector, it is recommended to use the S-VIDEO
	VIDEO IN	PAUSE connector			connection to minimize picture degradation while
					editing.
					● VHS deck ONLY
Recorder		Your recorder			When a Master Edit Control-equipped JVC camcorder is
					used, the camcorder is capable of controlling your
					recorder. The mini-plug cable is a mono 3.5 mm
POWER					mini-plug to mono 3.5 mm mini-plug connector.

	DIGITPURE TECHNOLOGY
HM-HDS1	● If connecting to a camcorder with a monaural output,
	connect the audio output connector on the
	camcorder to AUDIO IN L of the recorder.

			2	TURN ON THE RECORDER
S-VIDEO IN				Press POWER.
	S-VIDEO	AUDIO	3	SELECT RECORDING DECK
				Press HDD or VHS (or S-VHS).
	cable
		IN
	(supplied)
				• When you select VHS deck, load a recordable
	Audio/Video			cassette.
	cable
	(supplied)			SELECT INPUT MODE
AUDIO OUT
Player				Press CH +/– to select depending on the connector
				being used – “F-1” for the front panel input connectors,
Camcorder	VIDEO OUT		4 or “L-1” for the rear panel input connectors.
				ACCESS VIDEO INPUTS SCREEN
			5
EDIT		Mini-plug cable		1) Press MENU.
				2) Select “FUNCTION SET UP”, then press %Þ (or 5°)
S-VIDEO		(not supplied)
				or OK.
	(JVC camcorder only)
OUT				3) Select “VIDEO INPUTS”, then press %Þ (or 5°) or
				OK.
			6	SELECT VIDEO INPUT MODE
				Set ”S-VIDEO” or ”COMPOSITE” to “FRONT AUX F-1”
				or “REAR AUX L-1” by pressing %Þ (or 5°) or OK.
				For details on setting, see page 22.