26 EN

INITIAL SETTINGS (cont.)

Tuner Set

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

INFORMATION

The unit selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.

Auto Channel Set

Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting.

A Turn on the unit.

Press POWER (1).

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Access the Main Menu screen.

Press SET UP.

D Access the Tuner Set screen.

Press rt to move the highlight bar (arrow) to “TUNER SET”, then press ENTER or e.

E Perform Auto Channel Set.

Press rt to move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press ENTER or e. You can automatically set the receivable channels in your area in the order of their frequencies.

● When Auto Channel Set is complete, “SCAN COMPLETED” appears on the TV screen.

●If the scan was unsuccessful,

“SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the connections and start again.

F Return to the normal screen.

Press SET UP.