70 EN

EDITING (VCR DECK) (cont.)

Dubbing

(from DVD to VCR)

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.

However, it is not possible to dub the copy-protected disc. In such case, “ERROR” appears on the front display panel.

A Load a cassette and place a disc.For the VCR deck

Insert a cassette with the record safety tab intact.

For the DVD deck

APress OPEN/CLOSE (x) on the DVD deck to open the

disc tray.

BPlace the disc in the disc tray.

CPress OPEN/CLOSE (x) on the DVD deck to close the disc tray.

B Prepare the VCR deck for dubbing.

APress VCR.

BPress SP/EP to select recording speed.

CSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3) then press STOP (8).

C Prepare the DVD deck for dubbing.

APress DVD.

BSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5), REW (3), 6 or

2.

CPress PAUSE (9) to pause playback a little before the start point.

D Start dubbing.

Press and hold REC (7), then press PLAY (4) on the Remote.

●“dub” lights on the front display panel.

E End dubbing.

Press STOP (8).

●Be sure to press STOP (8) while the VCR indicator lights up on the unit.

NOTES:

●You can dub from DVD to VCR regardless of the scan mode setting. ( pg. 28) However, the progressive signals will be converted to the interlace signals when dubbing.

●Set “ON SCREEN GUIDE” to “OFF” ( pg. 81) if you do not want to record the on-screen display for DVD discs during dubbing.

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication will not appear during dubbing.

●Set “PICTURE CONTROL” to “EDIT”. ( pg. 75)